Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

Sonax 프로피라인 세라믹 코팅 CC 플라스틱+러버 희석비 & 사용 가이드

Sonax 프로피라인 세라믹 코팅 CC 플라스틱+러버 희석비 pH 스펙 카드

PROFILINE Ceramic Coating CC Plastic+Rubber

외장 플라스틱과 고무 표면에 결합하는 프로페셔널 세라믹 코팅으로, 소수성 보호와 지속적인 자연스러운 마감을 제공합니다. 변색, UV 손상, 환경 오염에 강하며 미도장 트림, 범퍼, 고무 씰에 이상적인 내구성 있는 세라믹 층을 형성합니다.

브랜드
Sonax
카테고리
Exterior : Coating
기본 희석 비율
RTU
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-08-16

작용 방식

  • 용제 기반 — 유기 용제가 주로 쓰인 제품입니다. 실내·플라스틱에는 환기와 시험 도포를 권합니다.

공개 성분

성분CAS역할
Toluene108-88-3용제
hanol67-56-1용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 외장 플라스틱과 고무 표면에 프로페셔널 세라믹 결합
  • 발수 마감으로 물과 환경 오염 반발
  • UV 손상, 변색, 탈색에 내성

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 도포 전 표면을 깨끗이 세정하고 탈지하세요.
  2. 표면이 완전히 건조되고 이전 코팅이나 잔여물이 없는지 확인하세요.
  3. 세라믹 어플리케이터 블록 또는 스웨이드 천에 소량 덜어 주세요.
  4. 표면 전체에 겹치는 직선 방향으로 얇게 펴 바르세요.
  5. 코팅이 플래시 오프될 때까지 기다리세요 — 가벼운 헤이즈가 나타나면 닦을 준비가 된 것입니다.
  6. 깨끗한 극세사 타월로 매끄럽고 균일하게 닦아 내세요.
  7. 물에 노출되기 전 코팅이 완전히 경화되도록 충분히 건조하세요.
  8. 더 높은 내구성을 원하면 2차 레이어를 추가 도포하세요.
  9. 직사광선이나 뜨거운 표면에서는 도포를 피하세요.

This professional ceramic coating bonds to exterior plastic and rubber surfaces, providing hydrophobic protection and a long-lasting, natural-looking finish that resists fading, UV damage, and environmental contamination. The durable ceramic layer keeps surfaces looking fresh and is ideal for unpainted trims, bumpers, and rubber seals.

Key features

  • Professional ceramic bonding to exterior plastic and rubber surfaces
  • Hydrophobic finish repels water and environmental contamination
  • Resists UV damage, fading, and discolouration

Usage

  1. Clean and degrease the surface thoroughly before application.
  2. Ensure the surface is completely dry and free from previous coatings or residue.
  3. Apply a small amount to a ceramic applicator block or suede cloth.
  4. Spread in thin, overlapping lines across the surface.
  5. Allow the coating to flash off — a slight haze signals it is ready.
  6. Buff with a clean microfibre cloth to a smooth, even finish.
  7. Allow the coating to cure fully before exposure to water.
  8. Apply a second layer for enhanced durability if desired.
  9. Avoid application in direct sunlight or on hot surfaces.

다른 이름: 소낙스, SONAX PROFILINE Ceramic Coating CC Plastic+Rubber, PCCCPR, SONAX PCCCPR, 02410000, 소낙스 CC 플라스틱+러버, 소낙스 PCCCPR, 플라스틱 러버 코팅, 소낙스 플라스틱 코팅

View in English

출처

  • Sonax 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Sonax의 다른 제품

  • CutMax Cutting Compound
  • PROFILINE Perfect Finish
  • PROFILINE CeramicCoating CC One
  • Cockpit Spray Vanilla-fresh
  • PROFILINE Ultimate Cut
  • PROFILINE Cut+Finish

같은 카테고리(Coating) 제품

  • Nano Traction BN Dispersion
  • PROVIDE Acrylic Wax
  • Soft99 Fukupika Dry
  • Soft99 New Scratch Clear Wax Mirror Finish Dark Black
  • Ganbass RECOVERY
  • Tershine Ghost Gleam Brilliance

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)