플라스틱 리스토어러 블랙
Plastic Restorer black
Sonax · SONAX Plastic Restorer black · PR · SONAX PR · 04091000 · 소낙스 플라스틱 리스토어러 · 소낙스 PR · PRB · SONAX PRB
심하게 색이 바랜 외장 플라스틱 트림의 색상을 되살려 주는 수성 착색 도료로, 실리콘을 사용하지 않고 부착력이 뛰어납니다. 내장된 스펀지 어플리케이터 덕분에 기존 브러시 도포 방식보다 훨씬 깔끔하고 정밀하게 작업할 수 있습니다.
- 브랜드
- 소낙스
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 심하게 탈색된 외장 플라스틱 복원용 수성 착색 도료, 강한 부착력
- 내장 스펀지 어플리케이터로 깔끔하게 도포
- 실리콘 무첨가
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 시공 전 표면이 깨끗하고 완전히 건조되어 있으며 실리콘이나 유분이 없는지 반드시 확인하세요.
- 일관된 제품 농도를 위해 사용 전마다 용기를 충분히 흔들어 주세요.
- 스펀지 팁을 표면에 아래로 눌러 제품이 어플리케이터에 충분히 스며들도록 하세요.
- 제품을 강제로 배출하기 위해 용기를 짜지 마세요, 고르지 않게 도포될 수 있습니다.
- 촉촉해진 스펀지로 얇고 고르게 바른 뒤 살짝 적신 천으로 마무리하세요.
- 인접 패널이나 유리에 튄 제품은 젖은 천으로 즉시 닦아내세요.
- 수분에 노출되기 전에 약 1시간 동안 완전히 건조시키세요.
- 사용 후 어플리케이터 스펀지를 물로 헹궈내고 보호 캡을 꽉 닫으세요.
- 실내, 엔진룸, 도어 씰, 소프트탑 플라스틱 패널, 오토바이 부품에는 사용하지 마세요.
- 동결되지 않도록 보관하세요.
A water-based, silicone-free tinting paint with strong adhesion, designed to revive the colour of severely faded exterior plastic trim. The built-in sponge applicator keeps application clean and controlled, without the mess of traditional brush-on methods.
Key features
- Water-based adhesive colour restorer for heavily faded exterior plastics
- Clean application via integrated sponge applicator
- Silicone-free
Usage
- Confirm the surface is clean, fully dry, and free from any silicone or grease contamination before starting.
- Shake the bottle thoroughly before each use to ensure an even product consistency.
- Press the sponge tip downward against the surface to allow the product to saturate the applicator.
- Do not squeeze the bottle body to force product out, as this can cause uneven distribution.
- Spread a thin, uniform layer with the moistened sponge, then even it out with a lightly dampened cloth.
- Immediately remove any splashes on nearby panels or glass with a damp cloth.
- Allow the treated surface about one hour to dry fully before exposing it to moisture.
- After use, rinse the applicator sponge with water and close the protective cap securely.
- Do not apply inside the cabin, in the engine bay, on door seals, soft-top plastic panels, or motorcycle components.
- Store the product protected from frost.