케르베로스 V2 세라믹 코팅
Cerberus V2 Ceramic Coating
GT · 게라지 · 게러지 · garage-therapy · 테라피 · 개러지 · 개러지테라피 · 게러지테라피 · Cerberus V2 · Cerberus Ceramic Coating · GT Cerberus · GT-THREE-CER · Garage Therapy Cerberus · 케르베로스 V2 · 가라지 테라피 케르베로스 · GT 케르베로스 · 케르베로스 세라믹 코팅 · 케르베로스
케르베로스 V2는 자동차 도장면을 UV, 화학 약품, 미세 스크래치로부터 보호하도록 설계된 고내구성 나노 세라믹 코팅입니다. 도장면에 강하게 결합해 최대 약 3년간 하이그로스·하이드로포빅 마감과 7H 경도, pH 2~11 화학 저항성을 제공합니다. 이전 버전과 비교해 코팅 두께, 경도, 광택 깊이, 표면 슬릭함이 모두 향상되었습니다.
- 브랜드
- Garage Therapy
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 최대 약 3년 지속 내구성
- 물 접촉각 107도
- pH 2~11 화학 저항성
- 7H 경도
- 워시 마링 저항성
- 강한 광택과 슬릭한 표면감
- 염분·부식·UV·열 저항성
- 나노 세라믹 포뮬러
- V2: 이전 버전 대비 두께·경도·광택 깊이 향상
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 도장 바디워크, 모터사이클, 경질 플라스틱, 헤드라이트, 테일라이트, 알로이 휠 림 등 적합한 표면에만 도포합니다.
- 예방 차원에서 애프터마켓 도장 시공 후 2~3개월간은 사용을 삼가고, 저품질 도장·유리·직물·타이어·소프트 트림에는 사용하지 않습니다.
- 동봉된 보호 장갑을 착용하고, 어플리케이터 블록에 새 스웨이드 클로스를 장착합니다.
- 스웨이드에 케르베로스 V2를 취하고 패널별로 직선의 겹치기 방식으로 도포합니다.
- 코팅이 플래시될 때까지 기다린 뒤, 깨끗한 마이크로파이버 클로스로 잔여물을 닦아 표면을 매끄럽게 마무리합니다.
Cerberus V2 is a highly durable nano-ceramic coating formulated to protect vehicle paintwork against UV exposure, chemical agents and minor surface scratches. It bonds firmly to the paint surface to deliver up to about 3 years of protection with a high-gloss, strongly hydrophobic finish, 7H hardness and chemical resistance across pH 2 to 11. Compared to the original version, V2 delivers greater coating thickness, hardness, depth of gloss and surface slickness.
Key features
- Up to about 3 years of coating durability
- Water contact angle of 107 degrees
- Chemical resistance pH 2–11
- 7H pencil hardness rating
- Wash marring resistance
- Strong gloss and surface slickness
- Resistant to salt, corrosion, UV and heat
- Nano-ceramic formulation
- V2: increased thickness, hardness and gloss depth over original
Usage
- Apply only to suitable surfaces: painted bodywork, motorbikes, hard plastic parts, headlights, taillights and alloy wheel rims.
- Avoid applying to aftermarket paint for 2–3 months as a precaution, and do not use on low-quality paint, glass, textiles, tyres or soft trims.
- Wear the included protective gloves and fit a fresh suede cloth to the supplied applicator block.
- Apply Cerberus V2 to the suede and work it into the surface using straight, overlapping passes, one panel at a time.
- Allow the coating to flash off, then buff away any residue with a clean microfibre cloth until the surface feels completely smooth.