알라우넨 바치바치 업! 클린 앤 코트
ALAUNEN BACHI BACHI UP! Clean and Coat
소프트99 · soft · 소프트 · Soft99 ALAUNEN BACHI BACHI UP! Clean and Coat · 소프트99 알라우넨 바치바치 업! 클린 앤 코트
세차와 발수 코팅을 한 번에 처리하는 이중 기능 제품으로, 차체와 유리 모두에 동시 적용됩니다. 워시 모드로 희석하여 샴푸처럼 사용하면 약 2개월, 코팅 모드로 원액을 직접 도포하면 약 3개월간 발수 효과가 지속됩니다. pH 중성 포뮬러로 모든 도장 색상과 코팅 차량에 사용 가능합니다.
- 브랜드
- Soft99
- 카테고리
- Exterior : Bucket Car Shampoo, Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 한 번 사용으로 세차와 코팅 동시 처리
- 차체와 유리에 동시에 발수 효과 부여
- 워시 모드: 약 2개월 발수 지속
- 코팅 모드: 약 3개월 보호 효과
- pH 중성 포뮬러
- 모든 색상 및 코팅 차량에 호환
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 펌프 베이스를 잡고 펌프 헤드를 열고, 차량 전체를 물로 헹궈 오염물을 제거합니다.
- 워시 모드: 버킷에 물 1리터와 샴푸 5펌프를 넣고(차 한 대당 약 3리터 필요), 스펀지나 천에 묻혀 차체와 유리를 세차합니다.
- 세차 후 거품이 완전히 제거될 때까지 물로 충분히 헹굽니다.
- 코팅 모드: 물에 적신 스펀지나 천에 2~3펌프를 도포하고, 한 번에 한 패널씩 고루 펴 바릅니다.
- 더운 환경에서는 1분, 추운 환경에서는 3분 방치 후, 물로 헹구거나 젖은 천으로 닦아낸 뒤 건조합니다.
A dual-function product that washes and applies a water-repellent coating to both body and glass in a single session. In Wash Mode it is diluted like a shampoo for approximately 2 months of water repellency; in Coating Mode the liquid is applied directly to the surface for roughly 3 months of protection. The pH-neutral formula is safe on all paint colours and coated vehicles.
Key features
- Wash and coat in a single application
- Water-repellent effect on body and glass simultaneously
- Wash Mode: approximately 2 months of water repellency
- Coating Mode: approximately 3 months of protection
- pH-neutral formula
- Compatible with all paint colours and coated vehicles
Usage
- Turn the pump head to open while holding the base, then rinse the entire vehicle with water to remove dirt.
- Wash Mode: dispense 5 pumps into a bucket with 1 litre of water (about 3 litres needed per car), soak a sponge or cloth, and wash the body and glass.
- After washing, rinse thoroughly with water until all foam is gone.
- Coating Mode: pump 2–3 times onto a damp sponge or cloth and spread evenly over one panel at a time.
- Leave for 1 minute in warm conditions or 3 minutes in cold, then rinse with water or wipe with a damp cloth before drying.