Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

Armour Detail Supply 디톡스 - 산성 샴푸 희석비 & 사용 가이드

Armour Detail Supply 디톡스 - 산성 샴푸 희석비 pH 스펙 카드

DETOX - Acidic Shampoo

물때(경수 미네랄), 도로 염분, 세제 잔여물, 환경 오염물을 제거해 도장면을 깊게 세척하고 맑게 정리하는 산성 미네랄 샴푸입니다. 이런 오염물은 광택을 흐리게 하고 코팅·실런트의 발수력을 떨어뜨립니다. 프리미엄 계면활성제와 킬레이트제를 사용한 고발포 제형으로, 별도의 중화 과정 없이 깨끗하게 헹궈지며 자체 광택을 더하지 않고 기존 보호막의 발수 성능을 되살립니다. 경수 지역, 코팅 유지관리, 겨울철 염분 제거에 적합합니다.

브랜드
Armour Detail Supply
카테고리
Exterior : Bucket Car Shampoo
기본 희석 비율
1:100~1:512
농축도
동일 카테고리 454개 제품 중 상위 23%
pH
acid (2)
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-09-26

작용 방식

  • 세정 계면활성제 — 때를 들어올려 물에 분산시키는 성분입니다.
  • 음이온 계면활성제 — 이 제품에 쓰인 계면활성제의 이온 유형입니다.

공개 성분

성분CAS역할
Sulfonic acids, C14-16-alkane hydroxy and C14-16-alkene, sodium salts (olefin sulfonate)68439-57-6음이온 계면활성제
d-Limonene5989-27-5용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 멀티 애시드 미네랄 세정 시스템으로 경수 미네랄·염분·스케일 제거
  • 프리미엄 계면활성제와 킬레이트제를 사용한 고발포 제형
  • 별도 중화 없이 깨끗하게 헹궈짐
  • 자체 광택 없이 기존 코팅의 발수 성능을 회복
  • 경수 지역·코팅 유지관리·겨울철 염분 제거에 적합
  • 100:1 - 200:1 ~ 3.5PH 512:1 ~ 4PH

희석 비율

용도희석비율
Exterior : Bucket Car Shampoo (기본)1:100~1:5121:100-512
Exterior : Foam1:101:10

사용법

  1. 강한 프리소크 시 폼캐논에 약 3oz를 넣고, 일반 발포 세척은 필요한 세정력에 따라 1~3oz를 사용합니다.
  2. 차량 전체에 폼을 넉넉히 도포하고 2~3분간 그대로 둡니다.
  3. 접촉 세차 시에는 물 3~4갤런당 1~2oz를 버킷에 희석합니다.
  4. 샴푸 잔여물이 남지 않도록 차량을 충분히 헹굽니다.

An acidic mineral cleaning shampoo that deep-cleans and clarifies paint, removing hard-water minerals, road salt, soap residue and environmental fallout that dull the finish and reduce the water behaviour of coatings and sealants. High-foaming with premium surfactants and chelating agents, it free-rinses with no separate neutralisation and restores the hydrophobic behaviour of existing protection without adding gloss of its own. Ideal for hard-water areas, coating maintenance and winter salt removal.

Key features

  • Multi-acid mineral cleaning system removes hard water minerals, salt and scale
  • High-foaming formula with premium surfactants and chelating agents
  • Free-rinsing with no additional neutralisation required
  • Restores hydrophobic behaviour of existing coatings without adding gloss
  • Suited to hard-water areas, coating maintenance and winter salt removal
  • 100:1 - 200:1 ~ 3.5PH 512:1 ~ 4PH

Usage

  1. For a heavy pre-soak, add about 3 oz to a foam cannon; for standard foaming use 1-3 oz depending on the cleaning power needed.
  2. Apply the foam generously over the entire vehicle and allow it to dwell for 2-3 minutes.
  3. For a contact wash, add 1-2 oz per 3-4 gallons of water in a wash bucket.
  4. Rinse the vehicle thoroughly to remove all traces of the shampoo.

다른 이름: Armour, 아머, 아머디테일, ADS, Armour-detail-supply, Armour Detail Supply DETOX, Armour DETOX, DETOX Acidic Shampoo, DETOX Acidic Mineral Reset Shampoo, DETOX, 아머 디테일 서플라이 디톡스, 디톡스 산성 샴푸

View in English

출처

  • Armour Detail Supply 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Armour Detail Supply의 다른 제품

  • REGEN - Acidic Cleaner
  • Armour BLOCK Mini Coating Applicator (6 Pack)
  • Tire+
  • Panel Prep
  • Shampoo+
  • The BLOCK Coating Applicator (6 Pack)

같은 카테고리(Bucket Car Shampoo) 제품

  • Shine Supply Hotshot
  • ProStaff CC Water Gold Car Shampoo
  • Ganbass Car Shampoo Neo
  • Armor All Snow Foam Car Wash
  • Obsessed Garage OG Soap
  • Shine Supply Shine Wash & Wax Soap

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)