Sam's Detailing 원스텝 폴리시 사용 가이드

Sam's Detailing 원스텝 폴리시 희석비 pH 스펙 카드

One Step Polish

거친 연마 단계로 시작해 미세한 마무리 단계로 변하는 원스텝 컴파운드 겸 폴리시로, 한 번의 작업으로 도장 결함을 교정합니다.

브랜드
Sam's Detailing
카테고리
Exterior : Polishes
최종 업데이트
2026-07-19

핵심 특징

사용법

  1. 오염물 제거를 위해 도장면을 클레이 작업하여 깨끗한 상태로 준비하세요.
  2. 오비탈/듀얼액션 머신 폴리셔와 함께 사용하세요.
  3. 패드에 콩알만한 크기로 3~4방울을 짜서 저속으로 약 40cm x 40cm 면적에 펴 바른 뒤, 속도를 올려 약 5분간 제품이 투명해질 때까지 작업하세요.
  4. 제품이 완전히 풀리면 속도를 낮춰 마무리 단계로 3회 정도 더 문질러 주세요.
  5. 깨끗한 마이크로파이버 타월로 마지막에 닦아내세요.

A single-stage compound-polish that starts as a coarser abrasive and breaks down into a fine finishing compound, correcting paint defects in one pass.

Key features

  • Single-stage compound and polish
  • Breaks down from coarse to fine
  • Corrects paintwork in one step

Usage

  1. Clay the paintwork first so it is clean and free of contamination.
  2. Use with an orbital/dual-action machine polisher.
  3. Apply 3-4 pea-sized drops to the pad, spread over about a 40cm x 40cm area at low speed, then increase speed and work for around 5 minutes until the polish turns clear.
  4. Once fully broken down, drop to a lower speed and make about 3 passes as a finishing stage.
  5. Buff off with a clean microfibre.

다른 이름: 샘스 디테일링, sam detailing, sam, 샘스, Sam's Detailing One Step Polish, Sam's One Step Polish, SD One Step Polish, OSP, Sam's Detailing OSP, Sam's OSP, SD OSP, 샘스 디테일링 원스텝 폴리시, 샘스 디테일링 OSP

View in English

출처

관련 제품

Sam's Detailing의 다른 제품

같은 카테고리(Polishes) 제품

더 보기