PVD-G03
PVD-G03은 자동차 유리 전용으로 개발된 손 연마제로, 유막과 볼록하게 굳어진 물때(스케일) 등 완고한 오염물을 간편하게 제거합니다. 기존 유리 컴파운드와는 비교할 수 없는 연마력과 마감 품질을 발휘하며, 폴리셔 없이 손 연마만으로도 충분한 효과를 얻을 수 있습니다. 불화수소산이나 불화암모늄 등의 독성 물질 및 계면활성제를 포함하지 않아 환경 친화적입니다.
- 브랜드
- PROVIDE
- 카테고리
- Exterior : Polishes
핵심 특징
- 유막 및 볼록한 물때(스케일) 제거
- 손 연마 전용 — 폴리셔 불필요
- 불화수소산·불화암모늄·계면활성제 미포함
- 기존 유리 컴파운드 대비 우수한 연마력
- 발수 코팅 전 유막 제거 전처리로 활용 가능
- 수용성 포뮬러로 사용 후 세척 용이
사용법
- 연마 전 유리 표면의 모래나 흙을 물로 미리 씻어냅니다.
- 유리 주변의 몰딩과 차체에 흠집이 생기지 않도록 마스킹 테이프를 붙입니다.
- 용기를 충분히 흔든 후 키친타올이나 부드러운 천에 적당량을 취해 유리 면에 원운동으로 15cm 구획씩 균일하게 연마합니다.
- 연마 중 표면이 건조해지면 분무기로 물을 뿌려 젖은 상태를 유지합니다.
- 상태를 확인하여 연마가 불완전하면 3~4단계를 오염이 제거될 때까지 반복합니다.
- 연마 후 충분한 물로 깨끗이 헹굽니다.
- 마지막으로 깨끗하고 건조한 천으로 닦아내어 마무리합니다.
PVD-G03 is a hand-polishing compound specifically formulated for automotive glass surfaces, capable of removing stubborn contaminants such as oil film and raised water-scale deposits. It operates through a different dimension of polishing power and finish quality compared to conventional glass compounds, and can be used effectively without any machine polisher. The formula is free of hydrofluoric acid, ammonium fluoride, and harmful surfactants, making it environmentally safe for glass surfaces.
Key features
- Removes oil film and raised water-scale deposits from glass
- Hand-polishing only — no machine polisher required
- Free of hydrofluoric acid, ammonium fluoride, and harmful surfactants
- Superior polishing power vs. conventional glass compounds
- Suitable as pre-treatment before water-repellent coating application
- Water-based formula for easy cleanup
Usage
- Rinse the glass surface with water to remove any sand or mud before polishing.
- Apply masking tape around the glass edges to protect surrounding trim and bodywork.
- Shake the container well, apply a small amount to a soft cloth such as kitchen paper or cotton, and polish the glass in circular motions working in 15 cm sections.
- If the surface begins to dry during polishing, mist with water to keep it in a wet state.
- Check progress; if polishing is incomplete, repeat steps 3 and 4 until the contaminants are removed.
- Rinse the polished area thoroughly with clean water.
- Wipe dry with a clean, dry cloth to finish.
다른 이름: 프로바이드, PROVIDE PVD-G03, PVD-G03 유리 연마제, 프로바이드 PVD-G03
View in English
출처