ProStaff 사키가케 미가키주쿠 윈도우 러버 앤 러버 몰딩 코팅 희석비 & 사용 가이드

SAKIGAKE MIGAKIJUKU Window Rubber and Rubber Molding Coating
간단히 발라주는 것만으로 색이 바래고 하얗게 뜬 웨더스트립, 루프레일 몰딩, 호스 등 고무 부품을 짙은 검정으로 되살려주는 고무 전용 코팅제입니다. 고농도 글라스계 폴리머 막이 약 6개월간 유지되며 자외선 흡수제가 추가 열화를 늦춰줍니다. 이미 변색된 고무를 되살리는 용도는 물론, 새 차의 고무 부품에 예방적으로도 사용할 수 있습니다.
- 브랜드
- ProStaff
- 카테고리
- Interior : Trim Sealants
- 기본 희석 비율
- RTU
- 최종 업데이트
- 2026-07-21
핵심 특징
- 하얗게 뜬 고무를 짙은 검정으로 복원
- 웨더스트립, 루프레일 몰딩, 호스, 패킹에 사용 가능
- 동봉 클로스와 헬퍼로 간편하게 도포
- 고농도 글라스계 폴리머 막이 약 6개월 지속
- 자외선 흡수제로 열화 지연
- 고무와 일체화된 무도장 수지부에도 사용 가능
희석 비율
| 용도 | 희석 | 비율 |
|---|---|---|
| Interior : Trim Sealants (기본) | RTU | 1:0 |
사용법
- 고무 부위의 모래, 진흙, 먼지, 유분을 씻어내고 물기를 닦은 뒤 완전히 건조시키세요.
- 동봉된 클로스를 헬퍼에 감아 감싸고, 사용 전에 병을 잘 흔들어 주세요.
- 병 입구를 클로스에 밀착시켜 코팅제를 약 1cm 정도 배어 나오게 한 뒤 얇고 고르게 펴 바르세요.
- 1회 시공은 약 50cm를 기준으로 하고, 도포 자국이 남으면 마른 면으로 가볍게 정돈하세요.
- 약 2시간 자연 건조하고, 완전히 경화될 때까지 문지르거나 물이 닿지 않게 하세요.
A rubber-specific coating that restores dulled, whitened weatherstrips, roof-rail moldings, hoses, and other rubber trim to a deep black finish with a simple wipe-on application. Its high-concentration glass-based polymer film lasts around six months and includes a UV absorber to slow further degradation. It can be used both to revive rubber that has already faded and, preventively, on new rubber to delay whitening.
Key features
- Restores whitened rubber to deep black
- Suitable for weatherstrips, roof rail moldings, hoses, gaskets
- Simple wipe-on application with supplied cloth and helper
- High-concentration glass polymer film lasts about 6 months
- Contains UV absorber to slow deterioration
- Also usable on unpainted resin integrated with rubber parts
Usage
- Wash sand, mud, dust, and oil off the rubber, wipe away water, and let the surface dry completely.
- Wrap the supplied cloth around the helper applicator, then shake the bottle well before use.
- Press the bottle mouth against the cloth to release about 1 cm of coating, then spread thinly and evenly.
- Treat roughly 50 cm per application, and even out any streaks with a dry area of the cloth.
- Let it air-dry about two hours, avoiding rubbing or water contact until fully cured.
다른 이름: 프로스태프, PROSTAFF SAKIGAKE MIGAKIJUKU Window Rubber and Rubber Molding Coating, 프로스태프 사키가케 미가키주쿠 윈도우 러버 앤 러버 몰딩 코팅, S158
출처
관련 제품
ProStaff의 다른 제품
- KIIROBIN GOLD
- RAIN MONSTER STRONG
- KOUTAKU TAIKYU WAX for Dark Color
- RAKUTORI
- XMAL1 Multi Purpose Polish with Abrasives
- SAKIGAKE MIGAKIJUKU COMPOUND SHAMPOO For Light Paint Colors
같은 카테고리(Trim Sealants) 제품
- The Class Infusion Dresser
- CARLAB CD Cockpit Dressing
- Elite Detailer Plastic Exterior Dressing
- Auto Finesse Dressle
- Ganbass Rubber Molding Protection
- Superior Products Instant Shine