러버 몰딩 프로텍션

Rubber Molding Protection

Rubber Molding Protection은 신차 및 최신 연식 차량의 고무·플라스틱 소재 전용으로 개발된 코팅제입니다. 기존 용제 기반 코팅제와 달리 고무를 손상시키는 용제를 사용하지 않으며, 오버코팅과 경화계 코팅의 중간 수준의 내구성을 제공합니다. 고무 몰딩, 그릴, 와이퍼 암 등에 내화학성, 발수성, 방오성을 부여합니다.

브랜드
Ganbass
카테고리
Interior : Trim Sealants
기본 희석 비율
RTU

핵심 특징

희석 비율

사용법

  1. 세차 후 REBOOT 등의 하지 처리제로 시공면을 전처리합니다.
  2. 시공면이 건조한 것을 확인한 후, 컷 크로스에 적당량을 묻혀 고무나 그릴 등 플라스틱 면에 도포합니다.
  3. 1~3분간 침투시킨 후 잉여분을 크로스로 닦아냅니다.

Rubber Molding Protection is a coating agent specifically developed for rubber and plastic surfaces on new and late-model vehicles. Unlike conventional solvent-based coatings that risk staining or swelling rubber, this product uses no rubber-damaging solvents and provides a protective film positioned between a spray-on overcoat and a hard ceramic coating in terms of durability — offering chemical resistance, hydrophobic protection, and anti-fouling properties for rubber seals, grilles, wiper arms, and unpainted plastic trim.

Key features

  • Solvent-free formula safe for rubber and plastic materials
  • Intermediate durability between overcoat and hard ceramic coating
  • Enhances chemical resistance of rubber and plastic parts
  • Imparts hydrophobic water-repellent protection
  • Anti-fouling property keeps surfaces easier to clean
  • Prevents moisture penetration to reduce material degradation
  • Suitable for rubber seals, grilles, wiper arms, and mud guards

Usage

  1. After washing, treat the surface with REBOOT or another base-prep chemical.
  2. Confirm the application surface is dry, then apply an appropriate amount of Rubber Molding Protection to a cut cloth and work it into rubber, grille, or other plastic surfaces.
  3. Allow to penetrate for 1 to 3 minutes, then wipe away the excess with a clean cloth.

다른 이름: 간바스, ganbas, Ganbass Rubber Molding Protection, RMP, 간바스 Rubber Molding Protection, 간바스 러버 몰딩 프로텍션

View in English

출처