POLYTOP 네옥스 그래핀 희석비 & 사용 가이드

POLYTOP 네옥스 그래핀 희석비 pH 스펙 카드

NEOX Graphene

폴리실라잔과 그래핀 기술을 기반으로 한 혁신적인 하이브리드 코팅제로 거의 모든 표면에 사용할 수 있다. 특수 성분이 매우 강한 발수성 보호막을 형성하며 소재 적합성이 뛰어나 풍화와 환경 요인으로부터 지속적으로 보호하고 오래가는 이지-투-클린 효과를 부여한다.

브랜드
POLYTOP
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-07-19

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 유광 도장은 점토바 또는 프렙 패드와 윤활제로 예비 작업한 뒤 안티홀로그램 폴리시로 마무리 폴리싱한다.
  2. 폴리탑 와이프 다운 스프레이로 구역별로 분사해 30~60초 방치 후 프리미엄 마이크로파이버 타월로 닦아 탈지한다.
  3. 무광 도장, 플라스틱, 고무는 폴리싱이나 점토 작업이 불가하므로 손세차로 충분히 세척한다.
  4. 용기를 흔든 뒤 네옥스 랙스 타월을 네옥스 애플리케이터에 감싸 처음 사용 시 20~30방울, 재도포 시 10~15방울을 사용하며 3~4개 패널마다 교체한다.
  5. 표면이 완전히 젖도록 겹쳐가며 십자 형태로 도포하고 넓은 패널은 구역을 나누어 작업한다.
  6. 4~10분의 반응 시간 후 에지리스 프리미엄 마이크로파이버 타월 두 장으로 압력 없이 제거하며 UV 램프로 잔여물을 확인한다.
  7. 실온에서 비, 풍화, 직사광선 없이 24시간 경화시키고, 완전히 굳을 때까지 9~12일간 세차나 강한 마찰을 피한다.

An innovative hybrid coating based on polysilazane and graphene technology, suitable for nearly all surfaces. Its special ingredients form an extremely hydrophobic protective layer with excellent material compatibility, offering lasting protection against weathering and long-lasting easy-to-clean properties.

Key features

  • Suitable for all surfaces except glass
  • Removal control visible under blacklight
  • Approx. 35,000-60,000 km durability
  • Reactive surface bonding
  • Layerable coating
  • Dirt-repellent
  • Easy on, easy off
  • Intense water-beading effect
  • Wet-look finish

Usage

  1. Prep gloss paint with clay/prep pad and lubricant, then finish polishing with an anti-hologram polish before coating.
  2. Degrease with POLYTOP Wipe-Down Spray, spraying section by section and letting it dwell 30-60 seconds before wiping with a premium microfiber cloth.
  3. For matte paint, plastic, or rubber, hand-wash thoroughly first since these surfaces cannot be polished or clayed.
  4. Shake the bottle, wrap a NEOX Rags cloth around the NEOX Applicator, and dispense 20-30 drops on first use or 10-15 drops on top-ups, replacing the applicator after 3-4 panels.
  5. Apply NEOX Graphene in overlapping crossing passes so the surface is fully wetted, treating larger panels in sections.
  6. After 4-10 minutes of reaction time, remove with two edgeless premium microfiber cloths without pressure, using a UV lamp to check for residue.
  7. Let it cure at room temperature for 24 hours away from rain, weather, or sun, and avoid washing or heavy friction for 9-12 days while it fully hardens.

다른 이름: 폴리탑, poly top, POLYTOP NEOX Graphene, PT NEOX Graphene, 폴리탑 네옥스 그래핀, 15310050

View in English

출처

관련 제품

POLYTOP의 다른 제품

같은 카테고리(Coating) 제품

더 보기