Dr. Beasley's 나노 LS-10 희석비 & 사용 가이드

Dr. Beasley's 나노 LS-10 희석비 pH 스펙 카드

Nano LS-10

나노 LS-10은 도장면, 유리, 금속, 플라스틱 등 다양한 표면에 내구성 있는 친수성 세라믹 코팅막을 형성하는 스프레이입니다. 자외선 손상, 풍화, 일상적인 오염으로부터 최대 1년간 보호하며, 독특한 물 흘림 작용으로 물자국을 줄이고 광택을 최대 3배까지 높여줍니다.

브랜드
Dr. Beasley's
카테고리
Exterior : Coating
기본 희석 비율
RTU
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-06-23

작용 방식

  • 용제 기반 — 유기 용제가 주로 쓰인 제품입니다. 실내·플라스틱에는 환기와 시험 도포를 권합니다.

공개 성분

성분CAS역할
Distillates (petroleum), hydrotreated light64742-47-8용제
Acetone67-64-1용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 도장면·유리·금속·플라스틱 다중 표면 보호
  • 최대 1년 내구성
  • 친수성 물 흘림 작용으로 물자국 감소
  • 광택 최대 3배 향상
  • 초부드러운 표면으로 오염물 부착 억제
  • 실내·직사광선 환경 맞춤 두 가지 시공 방법 제공

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 내구성을 극대화하려면 시공 전 표면을 최대한 깨끗하게 청소하십시오.
  2. 패널 또는 작은 구역에 나노 LS-10을 균일하게 분사하십시오.
  3. 첫 번째 마이크로파이버 타월로 격자 패턴으로 닦아 전체 표면에 고르게 도포하십시오.
  4. 두 번째 깨끗한 마이크로파이버 타월로 잔여물을 닦아내십시오.
  5. 다음 패널로 이동하여 원하는 모든 표면에 동일하게 반복하십시오.
  6. 시공 후 최소 1시간 차량을 그대로 두고, 1주일간 세차를 삼가십시오.

Nano LS-10 is a multi-surface ceramic coating spray that forms a durable hydrophilic barrier on paint, glass, metal, and plastic, providing up to one year of protection against UV damage, weathering, and everyday contaminants. Its unique sheeting action accelerates water runoff to reduce water spots, while intensifying gloss by up to three times.

Key features

  • Multi-surface protection: paint, glass, metal, plastic
  • Up to 1-year durability
  • Hydrophilic sheeting action reduces water spots
  • Intensifies gloss up to 3x
  • Ultra-slick finish resists contaminant buildup
  • Two application methods for indoors and direct sunlight

Usage

  1. Ensure the surface is as clean as possible before starting for best durability.
  2. Mist Nano LS-10 evenly onto one panel or small section.
  3. Wipe the first microfiber towel across the panel in a crosshatch pattern for complete coverage.
  4. Use a second clean microfiber towel to buff off any remaining residue.
  5. Move to the next panel and repeat until all desired surfaces are treated.
  6. Leave the vehicle undisturbed for at least one hour after application, and avoid washing for one week.

다른 이름: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's Nano LS-10, 닥터 비즐리 나노 LS-10

View in English

출처

  • Dr. Beasley's 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Dr. Beasley's의 다른 제품

  • Vanilla Scent
  • Tire Coat Pro
  • Foam Wax Applicator
  • Enzymatic Cleanser
  • Fresh Laundry Scent
  • Chassis Coating

같은 카테고리(Coating) 제품

  • Wax is Dead Bike
  • Ganbass FINAL FILLER MAX PLUS
  • AMMO AMMO REFLEX PRO II ENAMEL COAT
  • Adam's Polishes Adam's UV Ceramic Spray Coating
  • P&S Challenger Boat, RV & Aircraft Wax
  • Nihachi Pro Beauty F

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)