PG1-7MAX F
Nihachi Pro · 니하치 · 니하치프로 · nihachi · Nihachi Pro PG1-7MAX F · 28pro PG1-7MAX F · PG1-7MAX"F" · PG1-Seven Max F · 니하치 프로 PG1-7MAX F · PG1 세븐맥스 F · PG1-7MAX F 코팅 · PG1-7MAX F Model · PG1-7MAX F Series · 28Pro PG1-7MAX F · Nihachi PG1-7MAX F
PG1-7MAX F는 1회 시공으로 강렬한 광택과 초발수 효과를 발휘하는 고농도 유리계 자동차 코팅제입니다. F 시리즈는 대전 방지 효과를 추가하여 방오성을 높였습니다. 초기 시공 시 원액으로, 유지 관리 시 순수로 최대 100배 희석하여 사용 가능합니다.
- 브랜드
- 니하치 프로
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU ~ 1:100
핵심 특징
- 고농도 배합으로 깊은 피막감과 강렬한 광택 연출
- 강력한 발수 성능과 부드러운 미끄러운 표면 감촉
- F 시리즈 대전 방지 기술로 분진 부착 감소 및 주행 안정성 향상
- 1회 시공으로 최대 12개월 피막 지속
- 바디 패널, 휠, 크롬, 미도장 트림에 모두 시공 가능
- 초기 시공은 원액, 유지 관리 시 최대 1:100 희석 가능
희석 비율
- Exterior : Coating — RTU ~ 1:100 (1:0-100) (기본)
사용법
- 차량을 꼼꼼히 세차하여 먼지, 오염물, 물자국, 철분 등을 제거한 후 물기를 닦아냅니다.
- 제품이 묻으면 안 되는 부위(창문 유리 포함)를 마스킹 테이프로 양생합니다.
- 보디가 건조한 상태에서 시공합니다. 사용 전 제품을 충분히 흔들어 주세요.
- 살짝 물기를 짜낸 마이크로파이버 스펀지에 5회 스프레이하여 한 패널씩 도포합니다.
- 즉시 깨끗하게 짜낸 클로스로 닦아내어 얼룩을 남기지 않습니다.
- 건조한 클로스로 마무리하여 남은 수분과 얼룩을 제거합니다.
- 한 패널씩 차례로 전체 차량을 시공합니다.
- 유지 관리 시: 순수로 1:100 희석하여 정기 세차 시 광택과 발수를 보충합니다.
PG1-7MAX F is a high-concentration glass-based car coating delivering intense gloss and super water-repellency with a single application. The F-series adds an antistatic effect for improved contamination resistance. Can be used neat for initial coating or diluted up to 100x in purified water for ongoing maintenance.
Key features
- High-concentration formula delivers intense gloss and deep film thickness
- Strong hydrophobic water-repellency with smooth, slick surface feel
- Anti-static technology (F series) reduces dust adhesion and improves driving stability
- Single application provides up to 12 months of film protection
- Compatible with body panels, wheels, chrome, and unpainted trim
- Neat application for initial coat; dilutable up to 1:100 for maintenance
Usage
- Wash the vehicle thoroughly to remove dust, dirt, water spots, and iron particles. Wipe dry.
- Mask any areas where product should not contact (not for use on window glass).
- Apply on a dry body. Shake the product well before use.
- Spray 5 pushes onto a lightly damp microfiber sponge and spread evenly over one panel at a time.
- Immediately wipe off with a clean, damp-wrung cloth to remove excess and prevent streaks.
- Follow with a dry cloth wipe to remove any remaining moisture or unevenness.
- Proceed panel by panel until the entire vehicle is coated.
- For maintenance top-ups: dilute 1:100 with purified water and apply during regular washes to refresh gloss and water repellency.