No.9000
No.9000은 미도장 수지 파츠에 순수 투명 경화 수지 피막을 형성하는 고성능 하드 코팅제입니다. 광택 복원과 장기 보호 효과를 제공하며, 도장 바디 패널에도 적용 가능합니다. 최상의 밀착력과 내구성을 위해 사전 전처리가 필수적입니다.
- 브랜드
- Nihachi Pro
- 카테고리
- Exterior : Coating
핵심 특징
- 미도장 수지 파츠에 순수 투명 경화 수지 피막 형성
- 경년 열화된 파츠의 광택 복원 효과
- 도장 바디 패널에도 사용 가능
- 초발수 물방울 효과
- 전처리 여부에 따라 피막 지속 1~3년 이상
- 대전 방지 기능은 희생 피막 코팅과 중첩 시 활성화
- 저점도 설계로 시공 용이
사용법
- 차량을 깨끗이 세차하여 오염물을 모두 제거하고 완전히 건조시킵니다.
- 이온 디포짓이나 물자국이 있을 경우 디포짓 리무버로 전처리합니다.
- 제품이 묻으면 안 되는 부위를 마스킹 테이프로 보호합니다.
- 분리형 액체이므로 사용 전 약 30회 충분히 흔들어 줍니다.
- 건식 MF 스펀지에 약 10방울을 떨어뜨려 미도장 파츠에 골고루 도포합니다. 구역을 나눠 시공하세요.
- 깨끗한 건식 클로스로 잉여분을 닦아내고, 별도의 마감 클로스로 얼룩 없이 마무리합니다.
- 1~6단계를 쉬지 않고 연속으로 진행합니다. 경화된 후에는 얼룩 제거가 불가능합니다.
- 초기 경화(약 2시간) 후 습기에 노출되지 않도록 하며, 완전 안정 경화는 7일 정도 소요됩니다.
No.9000 is a high-performance hard coating agent that forms a pure transparent cured resin film on unpainted plastic trim parts, restoring gloss and providing long-lasting protection. It can also be applied to painted body panels. Proper surface preparation beforehand is essential for optimal adhesion and durability.
Key features
- Forms pure transparent cured resin film on unpainted plastic trim
- Restores gloss on aged or weathered trim parts
- Applicable to painted body panels as well
- Super water-repellent (발수) bead behavior
- Film durability 1–3+ years with proper surface prep
- Anti-static (대전 방지) effect when layered with sacrificial coating
- Low viscosity formulation for easy application
Usage
- Wash the vehicle thoroughly to remove all dirt and contaminants, then dry completely.
- If ion deposits or water spots are present, treat with a deposit remover before proceeding.
- Mask off any areas where the product should not be applied.
- Shake the bottle approximately 30 times before use (it is a separate-phase formula).
- Apply about 10 drops to a dry MF applicator sponge and spread evenly onto the trim panel, working in manageable sections.
- Wipe off excess with a clean dry cloth, then finish with a separate dry cloth to ensure no streaks remain.
- Complete all steps continuously without breaks — cured residue cannot be removed once hardened.
- Allow initial cure (~2 hours) before exposure to moisture; full stable cure occurs within 7 days.
다른 이름: 니하치, 니하치프로, nihachi, Nihachi Pro No.9000, 28pro No.9000, N°9000, N9000, No.9000 Parts Hard Coating, No.9000 코팅, 니하치 프로 No.9000, 28프로 No.9000, 미도장 수지 파츠 코팅 No.9000, N°9000 Parts Hard Coating, 나노 수지 코팅 No.9000
View in English