코팅 왁스 LF3
Coating WAX LF3
니하치 · 니하치프로 · nihachi · Nihachi Pro Coating WAX LF3 · 28pro Coating WAX LF3 · Coating WAX (LF3) · LF3 · 니하치 프로 코팅 왁스 LF3 · 28프로 코팅 왁스 LF3 · 코팅 WAX LF3 · Coating WAX LF3 코팅 · NHP-LF3 · 코팅 왁스 (LF3)
코팅 왁스 LF3은 NHP-LF 시리즈의 최신 모델로, 코팅 품질의 배합에서 왁스 특유의 깊고 윤기 있는 광택과 매끄러운 표면 감촉을 구현합니다. 대전 방지 기술이 주행 중 발생하는 정전기를 방산시켜 방오성을 높이고 도장면을 더욱 청결하게 유지합니다. 도장면, 미도장 수지, 헤드라이트, 휠, 창문 유리 등 차량 외장 전체에 시공 가능합니다.
- 브랜드
- Nihachi Pro
- 카테고리
- Exterior : Coating
핵심 특징
- 코팅 배합에서 구현된 왁스 특유의 깊은 광택과 부드러운 표면 마감
- 대전 방지 효과로 주행 중 정전기를 방산하여 분진 부착 감소
- 도장면, 미도장 수지, 헤드라이트, 테일렌즈, 번호판, 휠, 유리에 시공 가능
- 습식·반건식·건식 등 세 가지 시공 방법 지원
- 중복 도포 가능 – 반복 시공으로 광택 및 방오성 유지
- 직사광선 및 보디가 뜨거운 상태에서는 시공 금지
사용법
- 차량을 세차하고 수분을 완전히 닦아냅니다.
- 직사광선을 피해 그늘에서 시공합니다. 사용 전 제품을 약 30회 충분히 흔들어 주세요.
- 물에 적셔 단단히 짜낸 마이크로파이버 클로스에 적당량을 스프레이합니다.
- 한 패널씩 도포한 후 깨끗하게 짜낸 클로스로 즉시 닦아내어 얼룩을 제거합니다.
- 다음 패널로 이동하여 동일하게 시공합니다.
- 마지막으로 건식 닦기를 하면 마감이 더욱 좋아집니다.
- 창문 유리에 시공한 경우 주행 전 시야가 충분히 확보되는지 반드시 확인합니다.
Coating WAX LF3 is the latest evolution of the NHP-LF series, delivering a rich, wax-like gloss with an exceptionally smooth surface feel from a coating-grade formula. The anti-static technology disperses driving-induced static electricity, helping maintain cleaner paintwork for longer. Suitable for the entire vehicle exterior including painted panels, unpainted trim, headlights, wheels, and window glass.
Key features
- Wax-like deep gloss and silky smooth surface finish from a coating formula
- Anti-static effect disperses driving-induced static electricity to reduce dust adhesion
- Versatile application on paint, unpainted trim, headlights, taillights, number plates, wheels, and glass
- Three application methods: wet, semi-dry, and fully dry to suit any condition
- Layerable – repeat applications build and maintain gloss and contamination resistance
- Do not apply in direct sunlight or on hot surfaces
Usage
- Wash the vehicle and wipe off all moisture.
- Work in the shade, away from direct sunlight. Shake the product well (about 30 shakes).
- Spray an appropriate amount onto a damp, firmly-wrung microfiber cloth.
- Spread over one panel at a time, then wipe off thoroughly with a clean, damp-wrung cloth to remove streaks.
- Move to the next panel and repeat until the entire vehicle is covered.
- Finish with a final dry wipe for enhanced results.
- For window glass: confirm clear visibility before driving after application.