스피디 브라이트
SPEEDY BRITE
나노스킨 · NANOSKIN SPEEDY BRITE · NS SPEEDY BRITE · SB · NANOSKIN SB · NS SB · 나노스킨 스피디 브라이트 · NA-SBE
스피디 브라이트는 브레이크 분진·도로 오염물·기름·미네랄 침착물을 적은 문지름으로 분해하는 농축 저pH 유기산 휠·타이어 클리너입니다. DOT 기준에 따라 비발연성·비부식성으로 분류되어 기존 산성 클리너보다 부담이 적고, 클리어코트·도장·크롬 휠에 사용할 수 있습니다. 광택 알루미늄 또는 양극산화 휠에는 사용을 권장하지 않습니다.
- 브랜드
- NANOSKIN
- 카테고리
- Exterior : Tire&Wheel Cleaner, Exterior : Bucket Car Shampoo
- 기본 희석 비율
- 1:4
- pH
- acid (4)
핵심 특징
- 저pH 유기산 배합으로 브레이크 분진·도로 오염물 분해
- 기름·산화·미네랄 침착물 제거
- 스프레이 후 헹구는 방식, 문지름 최소화
- DOT 기준 비발연성·비부식성
- 클리어코트·도장·크롬 휠에 사용 가능
- 최대 1:4(제품:물) 희석 가능한 농축형
- 광택 알루미늄·양극산화 휠에는 사용 불가
희석 비율
- Exterior : Tire&Wheel Cleaner — 1:4 (1:4) (기본)
- Exterior : Bucket Car Shampoo — 1:99 (1:99)
사용법
- 먼저 잘 보이지 않는 부위에 소량을 테스트해 표면 적합성을 확인합니다.
- 눈 보호구를 착용하고 스피디 브라이트 1부에 물 4부를 혼합합니다.
- 희석액을 도포하기 전에 휠과 주변 표면을 물로 충분히 적셔 줍니다.
- 희석된 용액을 표면에 직접 분사하고 약 30초간 반응시킵니다.
- 심하게 오염된 휠과 타이어는 부드러운 브러시나 스펀지로 가볍게 문질러 줍니다.
- 휠과 주변 표면을 고압수로 충분히 헹구고, 표면에서 제품이 건조되지 않도록 주의합니다.
- 타이어 세척 시 잔여 산 성분 중화를 위해 알칼리 클리너를 휠에 추가로 도포합니다.
SPEEDY BRITE is a concentrated low-pH organic acid wheel and tire cleaner that dissolves brake dust, road grime, grease and mineral deposits with minimal scrubbing. It is non-fuming and non-corrosive per DOT protocol, so it is safer than traditional acid cleaners and suitable for clear-coated, painted and chrome wheels. It is not recommended for polished aluminum or anodized wheels.
Key features
- Low-pH organic acid formula dissolves brake dust and road grime
- Removes grease, oxidation and mineral deposits
- Spray-on, rinse-off with minimal scrubbing
- Non-fuming and non-corrosive per DOT protocol
- Suitable for clear-coated, painted and chrome wheels
- Concentrated, dilutable up to 1:4 (product to water)
- Not for use on polished aluminum or anodized wheels
Usage
- Test the product on a small, inconspicuous area first to confirm surface compatibility.
- Put on eye protection, then mix 1 part SPEEDY BRITE with 4 parts water.
- Wet the wheel and surrounding surfaces with water before applying the diluted product.
- Spray the diluted solution onto the surface and let it dwell for about 30 seconds.
- For heavily soiled wheels and tires, agitate with a soft brush or sponge.
- Pressure-rinse the wheel and all surrounding surfaces thoroughly; do not let the product dry on the surface.
- When cleaning tires, also apply an alkaline cleaner to the wheel to neutralize any remaining acid residue.