Nano Traction 프로 산성 클리너 희석비 & 사용 가이드

Nano Traction 프로 산성 클리너 희석비 pH 스펙 카드

Pro Acid Cleaner

프로 산성 클리너는 불소 계열 성분을 사용해 도장면의 미네랄 오염과 물자국을 제거하도록 만든 산성 클리너입니다. 스프레이 대신 젖은 마이크로파이버 타월에 묻혀 문지르는 방식으로 사용하며, 처리 중 흰색 미네랄 잔여물이 표면으로 떠오르는 것을 보고 제거 완료 여부를 판단할 수 있습니다. 전문가용 제품으로 사용 시 보안경과 보호장갑 착용이 필요합니다.

브랜드
Nano Traction
카테고리
Exterior : Remover
기본 희석 비율
RTU
pH
acid
최종 업데이트
2026-07-15

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)RTU1:0

사용법

  1. 미리 물로 세척해 표면의 모래와 흙을 제거하세요.
  2. 왁스나 유분이 남아있으면 반응하지 않으므로 먼저 제거하세요.
  3. 도포 전 표면의 수분을 제거하세요.
  4. 장갑을 착용하고 마이크로파이버 타월을 물에 적셔 꼭 짠 뒤 제품을 묻혀 표면에 문질러 바릅니다 (스프레이 금지).
  5. 수십 초 후 미네랄 오염이 흰색으로 떠오릅니다.
  6. 다시 닦아 확인하고, 남아있으면 과정을 반복하세요.
  7. 깨끗한 별도의 천으로 마무리 닦음을 합니다.

Pro Acid Cleaner is a fluoride-based acid cleaner formulated to lift mineral deposits and water spots from vehicle paint. It is worked in with a damp microfiber towel rather than sprayed, and treated areas show white mineral residue rising to the surface, letting you judge when removal is complete. It is intended for professional/advanced users and requires eye and glove protection during use.

Key features

  • Removes mineral deposits and water spots
  • Applied via microfiber towel, not sprayed
  • Visual cue when mineral residue lifts
  • For professional/advanced use with protective gear

Usage

  1. Rinse off sand and dirt from the surface beforehand.
  2. Remove any wax or oily residue first, since the product will not react through it.
  3. Remove excess water from the surface before application.
  4. Wearing gloves, dampen a microfiber towel with water, wring it out, add product, and wipe onto the surface (never spray).
  5. After tens of seconds, mineral residue will rise as a white film.
  6. Wipe again to check the surface; repeat the process if residue remains.
  7. Finish by wiping with a separate clean cloth.

다른 이름: 나노트랙션, 나노 트랙션, Nano Traction Pro Acid Cleaner, Nano Pro Acid Cleaner, NT Pro Acid Cleaner, 나노트랙션 프로 산성 클리너, プロ向け酸性クリーナー

View in English

출처

관련 제품

Nano Traction의 다른 제품

같은 카테고리(Remover) 제품

더 보기