Liquid Laboratories 브레이크아웃 희석비 & 사용 가이드

Liquid Laboratories 브레이크아웃 희석비 pH 스펙 카드

Breakout

브레이크아웃은 외장 표면의 아스팔트, 접착 잔류물, 교통 필름, 완고한 탄화수소 오염물을 빠르게 분해하는 솔벤트 기반 타르 제거제입니다. 접촉 즉시 고착된 타르에 침투하여 수초 내에 헹굼 가능한 상태로 분해합니다. 클리어 코트, 도장면, 유리, 대부분의 외장 플라스틱에 안전하게 사용 가능합니다

브랜드
Liquid Laboratories
카테고리
Exterior : Remover
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Remover (기본)RTU1:0

사용법

  1. 브레이크아웃을 오염 부위에 직접 도포하고 잠시 반응 시간을 줍니다
  2. 필요한 경우 부드럽게 문질러 완고한 오염물을 분리합니다
  3. 깨끗한 물로 처리 부위를 충분히 헹궈냅니다

Breakout is a fast-acting solvent-based tar remover engineered to dissolve asphalt, adhesive residues, traffic film, and stubborn hydrocarbon contamination from exterior surfaces. It penetrates and lifts bonded tar on contact, breaking it down into a rinseable solution within seconds. Safe on clear coat, paintwork, glass, and most exterior plastics

Key features

  • Fast-acting solvent-based formula
  • Dissolves asphalt, tar, adhesives, and traffic film
  • Penetrates and lifts bonded contamination on contact
  • Compatible with clear coat, paint, glass, and most plastics
  • Do not use on fresh paint, unlacquered trims, or sensitive plastics

Usage

  1. Apply Breakout directly to the contaminated area and allow it to dwell briefly
  2. Agitate gently if required to loosen stubborn deposits
  3. Rinse the treated area thoroughly with clean water

다른 이름: 리퀴드, Liquid, 리퀴드랩, Liquid Laboratories Breakout, Liquid Breakout, LL Breakout, 리퀴드 랩스 브레이크아웃, 리퀴드 브레이크아웃, LL02BRA500

View in English

출처

관련 제품

Liquid Laboratories의 다른 제품

같은 카테고리(Remover) 제품

더 보기