헤비 컷 컴파운드 400 그린 라인
Heavy Cut Compound 400 GREEN LINE
유해 휘발성 용제 없이 연마 자국과 깊은 스크래치를 제거하면서 광택을 남기는 VOC 무함유 1단계 연마 컴파운드입니다. DIN EN ISO 11890-2 기준 VOC 무함유 제품이며, 점차 미세해지는 연마 입자 덕분에 마무리까지 쾌적하게 작업할 수 있습니다. 소프트한 '스티키 페인트'를 포함한 모든 도장면에 적합합니다.
- 브랜드
- Menzerna
- 카테고리
- Exterior : Polishes
핵심 특징
- DIN EN ISO 11890-2 기준 VOC 무함유
- 유해 휘발성 용제 미포함
- 깊은 스크래치 제거 및 광택 생성
- 용제 냄새 없이 작업 가능
- 소량으로도 넓은 면적 작업
- 실리콘 무함유 및 분진 발생 없음
사용법
- 폴리싱 전에 표면을 깨끗이 세척합니다.
- 병을 흔든 뒤 폴리싱 패드에 컴파운드를 바릅니다.
- 로터리 또는 오비탈 머신으로 교차 도포 방식을 사용해 작업합니다.
- 낮은 속도에서 강한 압력으로 시작하고, 마지막 단계에서는 압력을 줄이고 속도를 높입니다.
- 약간 투명한 유막만 남을 때까지 컴파운드를 충분히 작업합니다.
- 프리미엄 마이크로파이버 천으로 잔여물을 닦아내고, 필요 시 두 번째 단계를 진행합니다.
A VOC-free single-step abrasive polish for automotive paint that removes sanding marks and deep scratches while leaving a glossy finish, without hazardous volatile solvents or unpleasant odors. It is VOC-free per DIN EN ISO 11890-2 and its diminishing abrasives allow comfortable working through to the finish. Suitable for all coatings, including soft 'sticky' paint.
Key features
- VOC-free per DIN EN ISO 11890-2
- No hazardous volatile solvents
- Removes deep scratches and builds gloss
- Works without solvent odor
- A little goes a long way
- Silicone-free with no dust buildup
Usage
- Thoroughly clean the surface before polishing.
- Shake the bottle and apply the polish onto the polishing pad.
- Work with a rotary or orbital machine using the cross-coating method.
- Begin at low speed with firm pressure, then release pressure and raise speed in the final passes.
- Work the polish in until only a slightly transparent oily film remains.
- Wipe off any residue with a premium microfiber cloth, and perform a second stage if the surface requires it.
다른 이름: 멘제르나, Menzerna Heavy Cut Compound 400 GREEN LINE, HCC 400 GREEN LINE, Menzerna HCC 400 GREEN LINE, Menzerna 400 GREEN LINE, 멘저나 헤비 컷 컴파운드 400 그린 라인, 멘저나 400 그린 라인
View in English