McKee's 37 그래핀 3인원 세라믹 폴리시 희석비 & 사용 가이드

McKee's 37 그래핀 3인원 세라믹 폴리시 희석비 pH 스펙 카드

Graphene 3-In-1 Ceramic Polish

케미컬 클리너·미세 연마·그래핀 옥사이드 실란트를 하나로 묶은 원스텝 세라믹 폴리시입니다. 가벼운 스월 마크와 산화를 정리하면서 약 1년 정도 지속된다고 안내되는 슬릭한 그래핀 광택을 남깁니다. 폼 폴리싱 또는 피니싱 패드를 사용해 손이나 듀얼액션 폴리셔로 시공합니다.

브랜드
McKee's 37
카테고리
Exterior : Polishes, Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 잘 흔들고 뜨거운 패널에는 시공하지 않습니다.
  2. 머신 시공 시 Redline All-In-One White 폼 패드에 5센트 동전 크기 세 방울을 떨어뜨립니다.
  3. 듀얼액션 폴리셔를 4000~5000 OPM으로 설정하고 패널당 4~5회 겹쳐 작업합니다.
  4. 잔여물을 닦고 M-Line 마이크로파이버 타월로 하이글로스로 마감합니다.
  5. 수작업 시 폼 또는 마이크로파이버 어플리케이터에 동전 크기로 덜어 헤이즈가 생길 때까지 문지릅니다.
  6. M-Line 마이크로파이버 타월로 잔여물을 닦아냅니다.

One-step ceramic polish that combines a chemical cleaner, light micro-abrasive polish, and graphene-oxide sealant. It addresses light swirl marks and oxidation while leaving a slick, glossy graphene finish that the maker reports lasting up to about a year. Apply by hand or with a dual-action polisher using a foam polishing or finishing pad.

Key features

  • Polish, swirl correction, and graphene sealant in one
  • Addresses light defects and oxidation
  • Reported graphene protection up to about a year
  • Hand or dual-action machine application
  • Slick, glossy finish on all colors

Usage

  1. Shake well and avoid applying to a hot panel.
  2. For machine use, place three nickel-sized drops on a Redline All-In-One White foam pad.
  3. Run the dual-action polisher at 4000 to 5000 OPM for four to five overlapping section passes per panel.
  4. Wipe excess off and buff to a high gloss with an M-Line microfiber towel.
  5. For hand application, apply a quarter-sized dollop to a foam or microfiber applicator and work in until hazing.
  6. Buff excess off with an M-Line microfiber towel.

다른 이름: 맥키스, 37, McKee's 37 Graphene 3-In-1 Ceramic Polish, MK37 Graphene 3-In-1 Ceramic Polish, G3 Polish, 맥키스 37 그래핀 3인원 세라믹 폴리시, 맥키스 37 G3 폴리시

View in English

출처

관련 제품

McKee's 37의 다른 제품

같은 카테고리(Polishes) 제품

더 보기