오버 코트 리퀴드 6.1
Over Coat Liquid 6.1
바이킹 프로젝트의 일환으로 한랭 기후를 위해 개발된 에멀전 타입 세라믹 보호제로, 5.3 베이스에 변성 플루오로폴리실라잔, 보로핀, 티타늄을 더했습니다. 도장면 밀착을 위해 계면활성제 함량을 높이고 미끄러움과 정전기 방지 성분을 제거해 내구성과 한랭지 작업성을 우선시했으며, 높은 발수성과 반사감 있는 마무리를 제공합니다.
- 브랜드
- Kamikaze Collection
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 한랭 기후용 에멀전 타입 세라믹 코팅
- 변성 플루오로폴리실라잔(PFAS/PFOS/PFOA 무함유)
- 막 밀착력 강화를 위한 보로핀
- 내구성을 위한 티타늄 첨가
- 매우 높은 발수성
- 5도 이상에서 도포 가능
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 마이크로파이버 천 두 장을 준비합니다.
- 세차 후 젖은 차체에 분사하거나, 물기를 짜낸 축축한 마이크로파이버 천에 도포해 각 패널에 펴 바릅니다.
- 두 번째 마른 마이크로파이버 천으로 닦아냅니다.
- 도포 후 3시간 동안 비나 물에 노출되지 않도록 하며, 완전 경화에는 약 10시간이 걸립니다.
An emulsion-type ceramic protection developed for cold climates as part of the Viking Project, building on a 5.3 base with modified fluoropolysilazane, borophene and titanium. It prioritizes durability and cold-weather application by raising surfactant content for paint adhesion and removing slickness and anti-static agents, producing a highly water-repellent, reflective finish.
Key features
- Emulsion-type ceramic coating for cold climates
- Modified fluoropolysilazane (PFAS/PFOS/PFOA-free)
- Borophene for enhanced film adhesion
- Titanium added for durability
- Very high water repellency
- Applicable at 5 degrees C and above
Usage
- Prepare two microfiber cloths.
- Spray onto the wet car body after washing, or apply to a damp wrung-out microfiber cloth and spread it over each panel.
- Wipe off with a second dry microfiber cloth.
- Avoid exposure to rain or water for three hours after application; full cure takes about ten hours.
다른 이름: 카미카제, kmkz, kamikaze, 카미카제 콜렉션, Kamikaze Collection Over Coat Liquid 6.1, Kamikaze Over Coat Liquid 6.1, 가미카제 오버 코트 리퀴드 6.1
View in English
출처