프리텍스트
PRETEXT
PRETEXT는 직물 내장재 추출 세정을 위한 고농축 프리 스프레이입니다. 차량 시트, 도어 패널, 매트, 헤드라이너의 직물 섬유 깊숙이 침투하여 유분, 유기 오염물, 일상 오염을 용해하고, 균형 잡힌 기포 형성으로 잔여 성분 없이 깨끗하게 헹궈집니다. 세정 후 차량 실내에 은은하고 상쾌한 향을 남깁니다.
- 브랜드
- KiurLab
- 카테고리
- Interior : Fabric Cleaner
- 기본 희석 비율
- 1:10~1:40
핵심 특징
- 직물 섬유 깊숙이 침투
- 유기 오염물, 유분, 일상 오염 제거
- 균형 잡힌 기포 — 직물에 과부하 없음
- 잔여물 없이 깨끗하게 헹궈짐
- 세정 후 상쾌하고 기분 좋은 향
- 시트, 도어 패널, 매트, 헤드라이너에 적합
- 고농축 — 경제적 사용
희석 비율
- Interior : Fabric Cleaner — 1:10~1:40 (1:10-40) (기본)
사용법
- 직사광선을 피하고 표면이 차가운 상태인지 확인합니다.
- 사용 전 용기를 흔듭니다.
- 오염 정도에 따라 따뜻한 물(약 40°C)에 희석합니다: 심한 오염 1:10, 일반 추출 세정 1:15~1:20, 가벼운 오염 또는 헤드라이너 리프레싱 1:20~1:40.
- 용액 도포 전 진공 청소기로 표면의 느슨한 오염물을 제거합니다.
- 준비된 희석 용액을 오염 부위에 분사합니다.
- 오염 정도에 따라 2~5분간 방치합니다. 제품이 건조되지 않도록 주의합니다.
- 부드러운 솔이나 스크럽 패드로 문지릅니다. 헤드라이너는 손으로 부드럽게만 작업합니다.
- 추출기로 잔여 제품과 오염물을 흡입합니다.
- 헹구기 전에 제품이 표면에서 건조되지 않도록 합니다. 필요 시 반복합니다.
- 전체 도포 전 눈에 잘 띄지 않는 부위에서 먼저 테스트합니다.
PRETEXT is a highly concentrated pre-spray for extraction cleaning of fabric car upholstery, door panels, floor mats, and headliners. It penetrates deeply into textile fibres to dissolve grease, organic stains, and everyday dirt, while its balanced-foaming formula rinses out cleanly without leaving active-ingredient residue. The product also leaves a subtle fresh scent in the vehicle interior after cleaning.
Key features
- Deep penetration into textile fibres
- Removes organic stains, grease, and everyday dirt
- Balanced foaming — does not overload fabric
- Rinses out cleanly without leaving residue
- Fresh, pleasant scent after cleaning
- Suitable for seats, door panels, floor mats, and headliners
- Highly concentrated — economical in use
Usage
- Avoid using in direct sunlight — ensure the surface is cool.
- Shake the container before use.
- Dilute in warm water (approx. 40°C) according to soiling level: 1:10 for heavy soiling; 1:15–1:20 for standard extraction cleaning; 1:20–1:40 for light soiling or headliner refreshing.
- Vacuum the surface to remove loose dirt before applying the solution.
- Spray the soiled area with the prepared diluted solution.
- Leave for 2–5 minutes depending on soiling level — do not allow the product to dry out.
- Agitate with a soft brush or scrub pad; on headliners, use only gentle manual agitation.
- Extract the product residue and loosened dirt with an extraction vacuum.
- Do not allow the product to dry on the surface before rinsing. Repeat if necessary.
- Always perform a spot test on an inconspicuous area before full application.
다른 이름: kiru, 키우랩, KiurLab PRETEXT, 키우랩 프리텍스트