피니시 컷
FINISH CUT
FINISH CUT는 P3000 그릿까지의 가벼운 스크래치, 홀로그램, 샌딩 자국을 제거하는 수성 마감 폴리싱 컴파운드입니다. 정밀하게 선별된 마이크로 연마재로 광택 깊이와 표면 매끄러움을 회복하며, 실리콘과 필러가 없어 결함을 숨기지 않고 실질적인 교정 효과를 제공합니다. 분진이 매우 적고 과일향과 파란색 컬러가 특징입니다.
- 브랜드
- KiurLab
- 카테고리
- Exterior : Polishes
핵심 특징
- 홀로그램, 미세 스크래치, P3000 샌딩 자국 제거
- 수성 포뮬러 — 모든 도장 유형에 안전
- 실리콘·필러 무첨가 — 실질적인 교정 효과
- 분진 매우 적음 — 쾌적한 작업 환경
- 최적의 작업 시간으로 정밀한 마감
- 듀얼액션 및 로터리 폴리셔 호환
- 과일향, 파란색 컬러
사용법
- 사용 전 제품을 충분히 흔듭니다.
- 깨끗한 폴리싱 패드에 소량(4~5방울)의 페이스트를 도포합니다.
- 저속으로 약 50 × 50 cm 면적에 고르게 펴 바릅니다.
- 속도를 높이고 적당한 압력으로 페이스트가 완전히 스며들 때까지 폴리싱합니다.
- 마이크로파이버 천으로 잔여물을 닦아내고, 보호 제품 도포 전 KiurLab ZERO로 표면을 탈지합니다.
FINISH CUT is a professional water-based finishing polish formulated to remove light scratches, holograms, and sanding marks down to P3000 grit. Its precisely calibrated micro-abrasives restore gloss depth and surface smoothness with a controlled working time, and the silicone- and filler-free formula delivers genuine correction results without masking defects. The paste produces very little dust and features a pleasant Tutti Frutti scent with a blue colour.
Key features
- Removes holograms, micro-scratches, and P3000 sanding marks
- Water-based formula — safe for all paint types
- No silicones or fillers — genuine correction result
- Very low dusting for a cleaner workspace
- Optimal working time for precise finishing
- Compatible with dual-action and rotary polishers
- Tutti Frutti scent, blue colour
Usage
- Shake the product well before use.
- Apply 4–5 small drops of paste to a clean polishing pad.
- Spread at low speed over a section of approximately 50 × 50 cm.
- Increase machine speed and polish with moderate pressure until the paste is fully worked in.
- Wipe off residue with a microfibre cloth, then degrease the surface with KiurLab ZERO before applying any protection.
다른 이름: kiru, 키우랩, KiurLab FINISH CUT, FC, KiurLab FC, 키우랩 피니시 컷, 키우랩 FC