Kamikaze Collection 페인트 클렌징 사용 가이드

A pH-neutral paint cleanser that strips away sacrificial coatings, wax, and water-based emulsion layers so a fresh paint surface is exposed for better bonding of new coatings and waxes. Rather than dissolving the film with alkali, it uses minimal spherical fine-ceramic abrasive to lift the old layer while staying gentle on the paint. It also safely removes minor water spots and oily soiling, and is added as a single step after washing then rinsed off with water.

Key features

• pH-neutral, gentle on paint
• Removes sacrificial coatings, wax and emulsion layers
• Minimal spherical fine-ceramic abrasive
• Exposes fresh paint for better coating adhesion
• Safely removes minor water spots and oil
• Single step added after washing

Usage

1. Wash the car thoroughly before use, and pre-treat water spots or silica scale if needed.
2. Put 1-2 pumps onto a microfiber sponge and apply over a roughly 50 cm square panel with light pressure.
3. Scrub each panel about two to three times until a white film covers the surface and the paint is no longer visible.
4. Rinse off with water and confirm the surface has become hydrophilic, reapplying in spots if any area remains.
5. If a white film remains after rinsing, lightly wash it off with a car-wash sponge; avoid applying in direct hot sun.