캡틴 컷
Cap'n Cut
캡틴 컷은 마린 전용으로 설계된 컷팅 컴파운드로, 유리섬유와 젤 코트 표면의 깊은 스크래치·미세 소용돌이 흠집·심한 오염을 제거합니다. 최종 폴리싱 단계에 앞서 표면을 깊은 광택 상태로 정돈해 줍니다.
- 브랜드
- Jax Wax
- 카테고리
- Exterior : Polishes
핵심 특징
- 선박 젤 코트 및 유리섬유용 강력 컷팅 컴파운드
- 깊은 스크래치·미세 흠집·심한 오염 제거
- 최종 폴리싱 전 깊은 광택 상태로 마무리
- 선박·RV 등 모든 마린 용도에 안전
- 손 도포 또는 DA·로터리 기계 사용 가능
사용법
- 충분히 흔든 후 패드에 3~4방울 도포하고 저속으로 표면에 펴 바르세요.
- DA 폴리셔 기준 4~6단계, 로터리 폴리셔 기준 3~4단계로 속도를 높이세요.
- 60~90cm 구역을 중간 압력으로 4~5회 작업한 후 압력을 서서히 줄이며 마무리하세요.
- 부드러운 마이크로파이버 타월로 잔여물을 제거하고, 전체 작업 전 소면적 테스트를 권장합니다.
Cap'n Cut is a cutting compound engineered for marine applications, formulated to remove deep scratches, swirl marks, and heavy contamination from fiberglass and gel coat surfaces. It prepares the surface to a deep gloss finish, making it ready for a final polish step.
Key features
- Heavy-cut compound for marine gel coat and fiberglass
- Removes deep scratches, swirl marks, and severe contamination
- Finishes to a deep gloss ready for final polish
- Safe for all marine applications including RVs
- Hand or machine (DA or rotary) application
Usage
- Shake well, then apply 3–4 drops to the desired pad and spread onto the surface at a slow machine speed.
- Increase the machine to the desired speed — generally 4–6 on a DA polisher or 3–4 on a rotary.
- Working in a 2–3 ft section, polish with medium pressure for 4–5 passes, then gradually lighten pressure to finish.
- Remove residue with a soft microfiber towel. Test on a small area first before treating the entire surface.
다른 이름: 잭스 왁스, 잭스왁스, 잭스, jax, jaxwax, Jax Wax Cap'n Cut, 잭스왁스 캡틴 컷
View in English