Innova Car 디투 체크 희석비 & 사용 가이드

Innova Car 디투 체크 희석비 pH 스펙 카드

D2 Check

도장면에서 왁스, 폴리싱 필러, 그리스 같은 유성 잔여물을 제거하는 왁스·필러 리무버입니다. 광택 후 교정 결과를 확인하는 검증 도구로도 쓰이며 코팅·실란트 밀착을 위한 표면을 준비합니다. 세라믹 코팅 경화 첫 한 시간 안에 생긴 얼룩이나 잔여물 수정에도 쓸 수 있습니다.

브랜드
Innova Car
카테고리
Exterior : Degreaser&Dewaxing
기본 희석 비율
RTU ~ 1:5
pH
alkali (9)
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Degreaser&Dewaxing (기본)RTU ~ 1:51:0-5

사용법

  1. 마이크로파이버 천에 D2 체크를 두세 번 분사합니다.
  2. 왁스·폴리싱 필러·그리스 잔여물이 완전히 제거될 때까지 표면을 닦습니다.
  3. 광택 후 확인 시 1:3~1:5로 희석하면 과도한 탈지 없이 결과를 볼 수 있습니다.
  4. 세라믹 코팅 첫 한 시간 내 얼룩 수정 시 원액을 도포해 해당 부위를 닦고 필요하면 보호제를 재도포합니다.
  5. 민감한 표면에 원액을 직접 분사하지 않습니다.

A wax and filler remover that degreases oily residues such as wax, polish fillers, and grease from painted surfaces. It doubles as a post-polishing checker to judge correction quality and prepares bodywork for better coating or sealant adhesion. It can also correct fresh ceramic-coating marks or haze within the first hour of curing.

Key features

  • Removes wax, polish fillers, and grease residue
  • Post-polishing checker for correction assessment
  • Slower evaporation than isopropyl alcohol for longer contact
  • Prepares surface for better coating and sealant adhesion
  • Corrects fresh ceramic-coating marks within the first hour
  • Dissolves fresh clear-coat overspray within 7 to 15 days of painting

Usage

  1. Spray D2 Check two to three times onto a microfibre cloth.
  2. Wipe the surface until fully dry to remove wax, polish filler, or grease residue.
  3. For post-polishing checks, dilute 1:3 to 1:5 to judge correction without over-stripping.
  4. To correct fresh ceramic-coating marks within an hour, apply undiluted, wipe the area, and reapply protection if needed.
  5. Avoid spraying undiluted product directly onto sensitive surfaces.

다른 이름: innova, 이노바, 이노바카, Innovacar D2 Check, IC D2 Check, D2C, Innovacar D2C, IC D2C, 이노바카 디투 체크, 이노바카 D2C, 79292

View in English

출처

관련 제품

Innova Car의 다른 제품

같은 카테고리(Degreaser&Dewaxing) 제품

더 보기