Adam's Polishes 서피스 프렙 희석비 & 사용 가이드

Adam's Polishes 서피스 프렙 희석비 pH 스펙 카드

Surface Prep

아담스 서피스 프렙은 약 30% 이소프로필 알코올에 윤활 성분과 계면활성제를 더한 코팅 전용 표면 클렌저입니다. 폴리싱 후 도장면에 남은 광택 오일과 컴파운드 잔여물, 기타 오염물을 제거해 세라믹 코팅, 왁스, 스프레이 실런트가 깨끗한 표면에 제대로 결합하도록 돕습니다. 윤활 처리된 제형으로 타월이 부드럽게 미끄러져 마링을 줄이고 빠르게 증발합니다.

브랜드
Adam's Polishes
카테고리
Exterior : Degreaser&Dewaxing
기본 희석 비율
RTU
pH
neutral (7)
최종 업데이트
2026-07-06

핵심 특징

희석 비율

용도희석비율
Exterior : Degreaser&Dewaxing (기본)RTU1:0

사용법

  1. 표면이 세차되어 건조되었고 필요 시 머신 폴리싱까지 끝났는지 확인하십시오.
  2. 서피스 프렙을 패널에 직접 분사하거나 깨끗한 마이크로파이버 타월에 뿌리십시오.
  3. 패널을 꼼꼼히 닦아 광택 오일과 잔여물을 제거하십시오.
  4. 코팅, 왁스, 실런트를 도포하기 전에 표면이 완전히 증발·건조되도록 두십시오.

Adam's Surface Prep is an isopropyl-alcohol-based pre-coating cleanser made with roughly 30% IPA plus added lubricants and surfactants. It strips polishing oils, polish and compound residue, and other contaminants left on paint after correction so a ceramic coating, wax, or spray sealant can bond to a truly clean surface. The lubricated formula lets the towel glide to reduce marring and flashes off quickly.

Key features

  • Isopropyl-alcohol-based prep cleanser at roughly 30% IPA
  • Removes polishing oils, polish and compound residue, and surface contaminants
  • Lubricated formula helps the towel glide to minimize marring
  • Use before applying a ceramic coating, wax, or spray sealant
  • Ready to use; spray on and wipe off
  • Flashes off quickly leaving a residue-free surface

Usage

  1. Make sure the surface is washed, dry, and machine-polished if needed.
  2. Spray Surface Prep directly onto the panel or onto a clean microfiber towel.
  3. Wipe the panel thoroughly to lift off polishing oils and residue.
  4. Let the surface flash off and dry completely before applying the coating, wax, or sealant.

다른 이름: ap, adams, adam's, adams-polish, 아담스, 아담스 폴리시, 아담스 폴리쉬, Adam's Surface Prep, Adam's Polishes Surface Prep, Adam's Paint Prep, 아담스 서피스 프렙, 아담스 폴리시 서피스 프렙

View in English

출처

관련 제품

Adam's Polishes의 다른 제품

같은 카테고리(Degreaser&Dewaxing) 제품

더 보기