레벨 3
Level 3
레벨 3은 일반적으로 도장이 단단한 외제차의 초기 연마 단계에 사용하도록 설계된 특수 수용성 연마제입니다. 도장이 단단한 국산차나 스피드를 중시하는 작업에도 적합하며, 레벨 2, 레벨 1과 함께 전문 디테일링 작업의 필수 연마제로 분류됩니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Polishes
핵심 특징
- 외제차 도장 초기 연마 전용 설계
- 도장이 단단한 국산차 또는 신속한 연마 작업에도 적합
- 수용성 — 코팅 전 탈지 불필요
- 싱글, 기어, 더블 액션 등 모든 폴리셔 호환
- 울, 우레탄, 파이버 등 모든 패드 사용 가능
- 도장면 달라붙음 및 열 손상 억제
- WINK 수지 코팅제와 혼합하여 원스텝 거울 마감 가능
사용법
- 세차 후 도장면의 철분과 실리카 스케일을 제거한 후 연마를 시작합니다.
- 울, 우레탄, 파이버 등 원하는 패드에 연마제를 적량 도포하고, 도장 상태를 확인하면서 연마합니다.
- 연마제가 분말 형태로 끊어질 때까지 연마하는 것이 기본이며, 도장 상태와 폴리셔 매칭에 따라 방법을 조정합니다.
- 연마 후 물로 연마 분말을 씻어 냅니다. 연마제가 눌어붙었거나 표면에 많이 남아 있는 경우 샴푸 세차를 진행하세요.
Level 3 is a specialized water-soluble polishing compound formulated primarily for the initial correction stage on imported car paint, which typically has harder clear coats. It is also well-suited for domestic cars with harder paint or when speed is prioritized over a multi-step finish, and is considered an essential compound for professional detailing operations alongside Level 2 and Level 1.
Key features
- Formulated for initial correction on imported car paint
- Also suitable for harder domestic car paint or speed-focused polishing
- Water-soluble — no degreasing required before coating
- Compatible with all polisher types (single, gear, dual-action)
- Works with wool, urethane, and fiber pads
- Resistant to smearing and heat damage on paint
- Can be blended with WINK resin coating for one-step mirror finish
Usage
- After washing the car, remove iron particles and silica scale deposits from the paint surface before starting polishing.
- Apply an appropriate amount of compound to the pad (wool, urethane, or fiber) and polish while carefully monitoring the paint condition.
- Continue polishing until the compound breaks down into powder — adjust technique based on paint condition and polisher matching.
- After polishing, wash off compound residue with water; use shampoo if compound has burned or is heavily remaining on the surface.
다른 이름: 간바스, ganbas, Ganbass Level 3, 간바스 레벨 3, 레벨3, レベル3水溶性研磨剤