Auto Finesse 카라믹스 세라믹 코팅 희석비 & 사용 가이드

Caramics is Auto Finesse's next-generation ceramic paint coating, engineered to deliver true ceramic durability and performance without a complicated application. Developed and refined on real cars in real driving conditions, it forms a hard, durable ceramic layer over the paintwork that provides up to three years of protection. The cured coating is strongly hydrophobic, rapidly sheeting water and reducing how readily dirt and contamination cling to the surface, while adding noticeable gloss, depth and slickness that makes routine washing far easier. Application is deliberately straightforward: the coating spreads and buffs cleanly, suiting both enthusiasts stepping into long-term protection and professional detailers.

Key features

• True ceramic coating providing up to 3 years of paint protection
• Strongly hydrophobic finish that rapidly repels water and resists dirt adhesion
• Adds gloss, depth and slickness while easing routine washing
• Straightforward, predictable application — spreads and buffs cleanly
• Real-world developed and tested on regularly driven vehicles
• Supplied as a 30ml kit with applicator, microfibre and finishing cloth

Usage

1. Prep: thoroughly wash and decontaminate the vehicle, polish where needed and remove all polishing oils with a panel wipe until the surface is completely clean and dry.
2. Work out of direct sunlight on cool paintwork; apply a small amount to the supplied applicator and coat one small section at a time in thin, even, complete passes.
3. Allow the coating to flash and begin bonding for about one to two minutes, monitoring it as working times vary with temperature and humidity.
4. Buff off the residue with the supplied microfibre, then finish with the finishing cloth and check under good lighting for high spots.
5. Allow the coating to fully cure before exposing the paint to water, following the recommended curing time.