Cleantle 어드마이어 세라믹 코팅 희석비 & 사용 가이드

Cleantle 어드마이어 세라믹 코팅 희석비 pH 스펙 카드

ADMIRE Ceramic Coating

어드마이어는 그래핀과 카본 나노튜브를 함유한 멀티 서피스 세라믹 코팅으로, 도장면, 플라스틱, 헤드라이트, 고무·타이어, 유리, 휠까지 폭넓게 보호합니다. 도포 중 UV 라이트를 비추면 코팅막이 보여 누락 없이 시공할 수 있습니다. 강한 발수성과 슬릭함, 화학·자외선 저항을 갖추며 약 3년 이상 또는 8만 km 정도까지 효과가 유지되는 것으로 안내됩니다.

브랜드
Cleantle
카테고리
Exterior : Coating, Exterior : Glass Sealant, Exterior : Tire&Wheel Sealant
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 도포 전 병을 30초 이상 충분히 흔들어 입자가 가라앉지 않게 합니다.
  2. 타르, 철분 등 오염을 제거하고 필요하면 폴리싱한 뒤 표면을 충분히 탈지합니다.
  3. 환기가 잘 되는 실내에서 직사광선과 강풍을 피해 시공하고, 뜨거운 표면에는 도포하지 않습니다.
  4. 동봉된 어플리케이터로 작은 구역씩 십자로 겹쳐 발라 줍니다.
  5. 1–2분 안에 깨끗한 마이크로파이버로 줄무늬가 사라질 때까지 닦아냅니다.
  6. 최소 12시간 동안 경화시키며 이 시간에는 물이나 비에 닿지 않도록 합니다.

ADMIRE is a multi-surface ceramic coating with graphene and carbon nanotubes designed for durable protection on paint, plastics, headlights, rubber, tires, glass and rims. The film stays visible under UV light during application, helping cover every panel without missing spots. It delivers strong hydrophobicity, slickness, and chemical and UV resistance, with a stated lifetime of about 3+ years or up to roughly 80,000 km.

Key features

  • Strong hydrophobicity with stated durability of about 3+ years or up to roughly 80,000 km
  • Quick and easy application
  • Visible under UV light before final buffing
  • Slick surface feel
  • Good chemical and UV resistance
  • Wide application window (8–35°C, 30–80% humidity)
  • Cures in about 12 hours
  • Easier washing reduces chemical usage
  • Formulated with graphene and carbon nanotubes

Usage

  1. Shake the bottle for at least 30 seconds before each application to keep particles suspended.
  2. Decontaminate the surface (tar, iron fallout), polish if needed, then degrease thoroughly.
  3. Work in a ventilated indoor space, away from direct sun and strong wind, and never on hot surfaces.
  4. Apply in small sections with the supplied applicator using crossing, overlapping passes.
  5. Within 1–2 minutes, buff with a clean microfiber until no streaks remain.
  6. Let the coating cure for at least 12 hours, keeping it away from water or rain.

다른 이름: 클린틀, ADMIRE, Admire, Admire Coating, Cleantle Admire, CT Admire, Admire Ceramic, Cleantle ADMIRE Ceramic Coating, Admire Graphene Coating, 어드마이어, 어드마이어 코팅, 클린틀 어드마이어

View in English

출처

관련 제품

Cleantle의 다른 제품

같은 카테고리(Coating) 제품

더 보기