Armour Detail Supply 패널 프렙 희석비 & 사용 가이드

Armour Detail Supply 패널 프렙 희석비 pH 스펙 카드

Panel Prep

패널 프렙은 이전 디테일링 단계에서 남은 잔여 화합물과 폴리싱 오일을 제거하기 위해 이소프로필 알코올, 전용 탈지제, 계면활성제를 함께 적용한 표면 준비 솔루션입니다. 거품 제제가 윤활제 역할을 하며 도포 중 스월과 마링을 줄여 줍니다. 왁스, 실런트, 코팅 도포 전 핵심 단계로 보호제의 성능을 끌어올리는 데 도움을 줍니다.

브랜드
Armour Detail Supply
카테고리
Exterior : Degreaser&Dewaxing
기본 희석 비율
RTU
pH
neutral (7)
실사용 영상
Polishing & Protecting a BMW M3 - Full Detail — Armour Detail Supply
최종 업데이트
2026-07-31

핵심 특징

희석 비율

용도희석비율
Exterior : Degreaser&Dewaxing (기본)RTU1:0

사용법

  1. 사용 전 보틀을 잘 흔들어 줍니다.
  2. 표면에 균일하게 분사하고 15-30초간 머무르게 둡니다.
  3. 숏냅 타월로 잔여물이 보이지 않을 때까지 닦습니다.
  4. 타월 면을 뒤집거나 깨끗한 두 번째 타월로 마무리 닦기를 합니다.
  5. 표면이 마르지 않도록 작은 구역 단위로 작업합니다.
  6. 오일이 남아 있다면 단계를 반복합니다.

Panel Prep is a surface preparation solution that combines isopropyl alcohol, dedicated degreasers, and surfactants to remove residual compounds and polishing oils left from earlier detailing steps. A foaming agent acts as a lubricant during application, helping to limit swirling and marring. It is the key step before waxing, sealing, or coating to help the protection layer perform well.

Key features

  • Isopropyl alcohol, dedicated degreasers, and surfactants
  • Removes residual compounds and polishing oils
  • Foaming agent acts as a lubricant
  • Helps limit swirling and marring
  • Required step before wax, sealant, or coating
  • Suits both pros and DIY users

Usage

  1. Shake the bottle well before use.
  2. Spray evenly across the surface and allow 15-30 seconds of dwell time.
  3. Wipe with a short-nap towel until the surface looks clear.
  4. Flip the towel or grab a clean second towel for the final wipe.
  5. Work in small sections so the product does not dry on the surface.
  6. Repeat the steps if any oils remain.

다른 이름: Armour, 아머, 아머디테일, ADS, Armour-detail-supply, Armour Panel Prep, Surface Prep, ADS Panel Prep, IPA Panel Prep, 아머 패널 프렙, 서피스 프렙, IPA 패널 프렙

View in English

출처

관련 제품

Armour Detail Supply의 다른 제품

같은 카테고리(Degreaser&Dewaxing) 제품

더 보기