프로 슬립
Pro Slip
프로 슬립은 PPF, 컬러 체인지 필름, 윈도우 틴트 시공용 슬립 용액으로, 접착제를 손상시키지 않고 필름을 정밀하게 위치시킬 수 있는 미끄러짐을 제공합니다. 접착제 당김과 필름 선 형성을 줄이고, 미완성 표면에서도 슬립성을 유지하며, 시공 후 건조 시간을 단축하는 데 도움을 줍니다.
- 브랜드
- ADBL
- 카테고리
- Exterior : PPF Maintenance
- 기본 희석 비율
- 1:50~1:500
핵심 특징
- 용도에 따라 1:50~1:500 희석
- 접착제 손상 없음, 잔여물 없음
- 냉수로 제거 가능
- 접착제 당김 및 필름 선 형성 감소
- 미완성 표면에서 슬립성 유지
- 필름 하단 건조 시간 단축에 도움
희석 비율
- Exterior : PPF Maintenance — 1:50~1:500 (1:50-500) (기본)
사용법
- 프로 슬립을 탈이온수에 희석합니다. 기본 1L당 약 5ml이며, 인장력이 높고 긴 작업 시간이 필요한 부위는 1L당 10~15ml를 사용합니다.
- 필름의 표면 코팅 면과 라이너 면에 용액을 도포해 이물질과 정전기를 제거한 뒤 실리콘 스퀴지로 닦아냅니다.
- 차량 표면에 용액을 도포하고 스퀴지로 먼지와 느슨한 오염물을 밀어내며 필요시 반복합니다.
- 라이너 제거 시 접착면과 차량 표면에 용액을 도포하고 필름을 올린 뒤 스퀴지로 밀어내며, 가장자리 마무리는 IPA 20% 혼합 또는 순수 탈이온수로 잔여 용액을 씻어냅니다.
Pro Slip is a slip solution for installing PPF, color change films, and window tints, giving the slipperiness needed to position film precisely without harming the adhesive. It reduces adhesive pull and film lines, keeps its slip on unfinished surfaces, and helps shorten drying time after installation.
Key features
- Dilution range 1:50 to 1:500 by application
- Does not damage adhesive or leave residue
- Removable with cold water
- Reduces adhesive pull and film lines
- Keeps slip on unfinished surfaces
- Helps speed drying under the film
Usage
- Mix Pro Slip with demineralised water, around 5 ml per 1 L, or 10 to 15 ml per 1 L for high-tension areas that need a longer working time.
- Apply the solution to the topcoat and liner sides of the film to clear impurities and static, then remove with a silicone squeegee.
- Apply the solution to the car surface and squeegee off dust and loose dirt, repeating if needed.
- When removing the liner, apply the solution to the adhesive and the car surface, lay the film, and squeegee it out; to close edges, rinse remaining solution with demineralised water, with or without 20% IPA.
다른 이름: ADBL Pro Slip, 에이디비엘 프로 슬립, ADB000687, ADB000688, ADB000689
View in English