Hybrid Solutions Pure Wash
하이브리드 솔루션스 퓨어 워시
A pH-neutral pro-grade car wash shampoo that blankets the vehicle in a thick, silky foam to deep-clean exterior surfaces while minimising contact with abrasive contaminants. Infused with Slick & Slide polymers, it glides over the clear coat to prevent scratches and swirls, and doubles as a bucket wash, foam spray, or clay bar lubricant.
pH 중성의 프로급 카 워시 샴푸로 차량을 두껍고 실키한 폼으로 감싸 외장을 깊이 세정하면서 연마성 오염과의 접촉을 최소화합니다. Slick & Slide 폴리머가 클리어코트 위를 부드럽게 미끄러지며 스크래치와 스월을 방지하고, 버킷 워시·폼 스프레이·클레이바 윤활제로 다목적 활용이 가능합니다.
- Brand
- Turtle Wax
- Categories
- Exterior : Bucket Car Shampoo
- Primary dilution
- 1:213~1:320
Key features
- pH-neutral formula safe for all paint types
- Thick, silky foam for deep exterior cleaning
- Slick & Slide polymers prevent scratches and swirls
- Versatile use as bucket wash, foam spray, or clay lubricant
- Limits contact with abrasive soils during washing
- Foam cannon compatible
Dilution
- Exterior : Bucket Car Shampoo — 1:213~1:320 (1:213-320) (primary)
- Exterior : Foam — 1:7 (1:7)
Usage
- For best results, work in the shade away from direct sunlight.
- Rinse the vehicle from top to bottom to remove loose soils and contaminants.
- Bucket wash: add 2–3 oz of Pure Wash to a 5-gallon bucket, then fill with a strong stream of water to generate thick foam. Wash from top to bottom, then rinse thoroughly and towel dry.
- Foam spray: mix 2 oz of Pure Wash with 14 oz of warm water. Apply foam to one 2x2-foot panel at a time and agitate with a microfiber wash mitt. Rinse thoroughly and continue panel by panel from the roof downward.
- Clay bar lubricant: mix 2 oz of Pure Wash with 14 oz of warm water. Apply foam to the car surface, then work a clay mitt in light back-and-forth passes over the clear coat panel by panel. Rinse the mitt regularly, then rinse the vehicle thoroughly when done.
핵심 특징
- 모든 도장 타입에 안전한 pH 중성 포뮬러
- 깊은 외장 세정을 위한 두껍고 실키한 폼
- Slick & Slide 폴리머로 스크래치·스월 방지
- 버킷 워시·폼 스프레이·클레이 윤활제로 다용도 활용
- 세정 중 연마성 오염과의 접촉 최소화
- 폼캐논 호환
사용법
- 직사광선을 피해 그늘진 곳에서 작업하면 가장 좋은 결과를 얻을 수 있습니다.
- 느슨한 오염과 오염물을 제거하기 위해 차량을 위에서 아래로 헹굽니다.
- 버킷 워시: 5갤런 버킷에 퓨어 워시 2~3oz를 넣고 강한 물줄기로 채워 풍성한 거품을 만듭니다. 위에서 아래로 세차한 후 충분히 헹구고 타월로 건조합니다.
- 폼 스프레이: 퓨어 워시 2oz와 따뜻한 물 14oz를 잘 섞습니다. 약 60×60cm 패널 단위로 폼을 도포하고 극세사 세차 미트로 오염을 문질러 제거한 후 충분히 헹굽니다. 루프부터 아래 방향으로 패널별로 반복합니다.
- 클레이바 윤활제: 퓨어 워시 2oz와 따뜻한 물 14oz를 잘 섞습니다. 차량 표면에 폼을 도포하고 클레이 미트를 가볍게 앞뒤로 움직이며 패널별로 클리어코트를 탈오염합니다. 미트를 깨끗한 물에 자주 헹군 후 작업이 끝나면 차량 전체를 충분히 헹굽니다.