TUF SHINE Tire Clearcoat Dilution Ratios & User Guide

TUF SHINE Tire Clearcoat dilution ratio and pH specification chart

타이어 클리어코트

TUF SHINE Tire Clearcoat — Exterior : Tire&Wheel Sealant. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/tuf-shine/tire-clearcoat

TUF SHINE 타이어 클리어코트 — Exterior : Tire&Wheel Sealant. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/tuf-shine/tire-clearcoat

TUF SHINE Tire Clearcoat is a water-based tire coating that seals sidewalls and whitewalls with a durable, glossy finish that resists sling-off and withstands repeated pressure washing. Free of oils and silicones, it locks in the tire's factory lubricants to guard against weathering while giving an anti-static, deep black wet look that lasts for months. Building up multiple thin coats adds further shine and protection.

터프샤인 타이어 클리어코트는 수성 타이어 코팅제로, 타이어 옆면과 화이트월을 밀봉해 흘러내림 없이 오랫동안 광택을 유지하며 반복적인 고압 세차에도 견딥니다. 오일이나 실리콘 성분이 없어 타이어에 남아있는 윤활 성분을 그대로 보존하면서, 정전기 방지 효과로 먼지가 덜 붙는 짙은 블랙 웻룩을 몇 달간 유지시켜 줍니다. 여러 겹 얇게 도포할수록 광택과 보호력이 더해집니다.

Brand
TUF SHINE
Categories
Exterior : Tire&Wheel Sealant
Primary dilution
RTU
Last updated
2026-07-19

Key features

Dilution

UseDilutionRatio
Exterior : Tire&Wheel Sealant (primary)RTU1:0

Usage

  1. Shake well and apply only to cool, dry tires.
  2. Avoid direct sunlight and do not apply below 50 degrees F.
  3. Press the dispenser nozzle into the applicator sponge and dispense a small amount to prime it.
  4. Apply a smooth, even coat following the circular pattern of the tire, smoothing out any runs.
  5. Wipe off immediately with a damp towel if any black residue transfers onto wheels or paint.
  6. Let each coat dry before applying the next; two or three coats deepen the shine and protection.
  7. Rinse the applicator sponge thoroughly with water after use so it can be reused.

핵심 특징

  • 오일·실리콘 무첨가 수성 포뮬러
  • 화이트월과 돌출 레터링의 변색 방지 밀봉
  • 반복적인 고압 세차에 견디는 내구성
  • 정전기 방지로 먼지 부착 감소
  • 도포 횟수로 조절되는 짙은 블랙 웻룩
  • 수개월간 지속되는 보호력
  • 흘러내림이나 잔여물 없는 마무리

사용법

  1. 잘 흔든 후 식어 있고 마른 타이어에만 도포합니다.
  2. 직사광선을 피하고 화씨 50도(섭씨 약 10도) 이하에서는 사용하지 않습니다.
  3. 토출구를 도포용 스펀지에 눌러 소량을 짜내어 스펀지를 적셔줍니다.
  4. 타이어의 원형 결을 따라 얇고 고르게 펴 바르고 흘러내린 부분은 정리합니다.
  5. 검은 잔여물이 휠이나 도장면에 묻으면 젖은 타월로 즉시 닦아냅니다.
  6. 한 겹이 마른 뒤 다음 겹을 올리며, 두세 겹을 도포하면 광택과 보호력이 깊어집니다.
  7. 사용 후 도포용 스펀지를 물로 충분히 헹구어 재사용합니다.

Also known as: 터프샤인, tuf, TUF SHINE Tire Clearcoat, TUF Tire Clearcoat, TS Tire Clearcoat, 터프샤인 타이어 클리어코트

한국어로 보기

Sources

Related products

More from TUF SHINE

More Tire&Wheel Sealant products

Explore more