SWAG NEUTRAL FOAM V.2 Dilution Ratios & User Guide

SWAG NEUTRAL FOAM V.2 dilution ratio and pH specification chart

뉴트럴 폼 V.2

SWAG NEUTRAL FOAM V.2 — Exterior : Foam, neutral pH, base dilution 1:2~1:200. At 1:2, mix about 500 ml of SWAG NEUTRAL FOAM V.2 per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/swag/neutral-foam-v-2

SWAG 뉴트럴 폼 V.2 — Exterior : Foam, pH neutral, 기본 희석 1:2~1:200. 1:2 기준 물 1L당 SWAG 뉴트럴 폼 V.2 약 500ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/swag/neutral-foam-v-2

A concentrated pH-neutral active foam for the pre-wash stage. Fed through a foam gun it builds a dense white snow layer that wets every panel and lifts stubborn soiling before the contact wash, which lowers the chance of marring during hand washing. It works on painted, plastic and glass surfaces and stays safe for applied waxes, sealants, ceramic coatings and chrome or aluminium trim.

예비 세차 단계에 쓰는 농축 중성 액티브 폼입니다. 폼건으로 도포하면 밀도 높은 흰 스노우 층이 모든 패널을 적시며 고착 오염물을 띄워, 접촉 세차 과정에서 흠집이 생길 위험을 낮춥니다. 도장면과 플라스틱, 유리에 사용할 수 있고 도포된 왁스와 실란트, 세라믹 코팅, 크롬·알루미늄 부위에도 안전합니다.

Brand
SWAG
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:2~1:200
pH
neutral
Last updated
2026-08-01

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:2~1:2001:2-200
Exterior : Pre-washing (Pretreatment)1:10~1:2001:10-200

Usage

  1. Work in the shade on a cool, dry surface and do not let the foam dry on the paint.
  2. Shake the bottle well before use.
  3. Choose the cleaning power and foam density you want, then mix the solution with warm water.
  4. Cover all vehicle surfaces with foam.
  5. Wait 4 to 10 minutes for the dirt to loosen.
  6. Rinse off with a pressure washer.
  7. Continue with the hand wash.
  8. Apply SWAG HYDRO COAT for water repellency and easier drying, then rinse the whole vehicle.
  9. Dry the bodywork with a towel or a blower.

핵심 특징

  • 고농축 배합
  • 밀도 높은 흰색 스노우 폼
  • 중성으로 맞춘 pH
  • 도포된 왁스와 코팅에 순함
  • 손 세차 시 도장 스크래치 감소
  • 세정력과 폼 밀도 조절 가능

사용법

  1. 그늘에서 서늘하고 마른 표면에 작업하며 폼이 도장면에서 마르지 않게 합니다.
  2. 사용 전 용기를 충분히 흔듭니다.
  3. 원하는 세정력과 폼 밀도를 정한 뒤 따뜻한 물로 희석액을 만듭니다.
  4. 차량 표면 전체에 폼을 덮습니다.
  5. 4~10분간 두어 오염물이 풀리도록 합니다.
  6. 고압 세척기로 헹굽니다.
  7. 이어서 손 세차를 진행합니다.
  8. SWAG HYDRO COAT를 도포해 발수와 건조를 돕고 차량 전체를 헹굽니다.
  9. 타월이나 블로어로 차체를 건조합니다.

Also known as: 스웨그, 스웩, Swag NEUTRAL FOAM V.2, SNF, Swag SNF, 스웨그 뉴트럴 폼 V.2, 스웨그 SNF

한국어로 보기

Sources

Related products

More from SWAG

More Foam products

Explore more