Stjärnagloss Glo Dilution Ratios & User Guide

Stjärnagloss Glo dilution ratio and pH specification chart

글뢰

Stjärnagloss Glo — Exterior : Coating, base dilution 1:10~1:20. At 1:10, mix about 100 ml of Stjärnagloss Glo per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/stj-rnagloss/gl

Stjärnagloss 글뢰 — Exterior : Coating, 기본 희석 1:10~1:20. 1:10 기준 물 1L당 Stjärnagloss 글뢰 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/stj-rnagloss/gl

Glö is a hydrophobic protective snow foam used after the pre-wash and contact wash stages to add gloss and protection in a single foaming step. Applied through a snow foam cannon, the foam crackles and disperses, leaving paint and glass glossy with tall water beads. A litre of concentrate yields enough mixture for many protective layers, and the cannon must be flushed with clean water after each use.

글뢰는 전처리와 접촉 세차 단계 이후에 사용하여 한 번의 거품 도포로 광택과 보호막을 더해 주는 발수 보호 스노우 폼입니다. 스노우 폼 캐논으로 분사하면 거품이 부서지며 퍼져, 도장면과 유리에 광택과 풍성한 물방울 맺힘을 남깁니다. 농축액 1L로 여러 차례 보호막을 만들 수 있으며, 사용 후에는 캐논을 깨끗한 물로 헹궈야 합니다.

Brand
Stjärnagloss
Categories
Exterior : Coating, Exterior : Foam
Primary dilution
1:10~1:20
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:10~1:201:10-20

Usage

  1. Use Glö after the pre-wash and contact wash stages, starting with about 100ml of concentrate in a 1 litre lance flask.
  2. Layer the foam over the car via a snow foam cannon with a pressure washer of 130bar or more, never on hot panels.
  3. Let the foam dwell briefly and crackle without drying out, then rinse thoroughly with water.
  4. Towel dry the vehicle to reveal the gloss and beading.
  5. Flush a litre of clean water through the snow foam lance after use to stop the gauze gumming up.

핵심 특징

  • 발수 보호 스노우 폼
  • 광택과 강한 물방울 맺힘 부여
  • 접촉 세차 후 스노우 폼 캐논으로 도포
  • 1L로 여러 차례 보호막 형성

사용법

  1. 전처리와 접촉 세차 단계를 마친 후 1L 랜스 보틀에 농축액 약 100ml를 넣어 시작합니다.
  2. 130bar 이상의 고압 세척기를 갖춘 스노우 폼 캐논으로 차체에 거품을 도포하되 뜨거운 패널에는 사용하지 않습니다.
  3. 거품이 마르지 않게 잠시 머무르며 부서지도록 둔 뒤 물로 충분히 헹굽니다.
  4. 타월로 물기를 닦아 광택과 물방울 맺힘을 드러냅니다.
  5. 사용 후 스노우 폼 랜스에 깨끗한 물 1L를 흘려보내 거름망이 막히지 않도록 합니다.

Also known as: stjarnagloss, Glö, Stjärnagloss Glö, 셰르나글로스 글뢰

한국어로 보기

Sources

Related products

More from Stjärnagloss

More Coating products

Explore more