Double Sour Shampoo & Foam
더블 사워 샴푸 앤 폼
샤이니 개러지 · 샤이니개러지 · 샤이니게러지 · 샤이니 게러지 · Shiny Garage Double Sour Shampoo & Foam · SG Double Sour Shampoo & Foam · DSSF · Shiny Garage DSSF · 샤이니 개러지 더블 사워 샴푸 앤 폼
A market-first 2-in-1 acidic car shampoo and active foam concentrate formulated specifically for vehicles protected by ceramic and quartz coatings. Effectively removes fresh mineral deposits, restores coating hydrophobic properties, and delivers rich, stable lather with excellent lubricity — all at a safe, controlled acidic pH of 5.5.
세라믹 및 쿼츠 코팅으로 보호된 차량을 위해 특별히 설계된 시장 최초의 산성 샴푸 겸 액티브 폼 2-in-1 농축액입니다. 신선한 미네랄 침착물을 효과적으로 제거하고 코팅의 발수성을 복원하며, pH 5.5의 안전하고 조절된 산성으로 풍부하고 안정적인 거품과 우수한 윤활성을 제공합니다.
- Brand
- Shiny Garage
- Categories
- Exterior : Bucket Car Shampoo, Exterior : Foam
- Primary dilution
- 1:10
- pH
- acid (5.5)
Key features
- Market-first 2-in-1 acidic shampoo and active foam in one product
- Acidic pH 5.5 — safely removes fresh mineral deposits from coated surfaces
- Restores ceramic and quartz coating hydrophobic performance
- Highly concentrated — 20 ml per 10 L for regular maintenance wash
- Produces rich, dense, stable foam with excellent lubricity
- Safe for coated paintwork — no risk of damage
- Fresh laundry scent
Dilution
- Exterior : Foam — 1:10 (1:10) (primary)
- Exterior : Bucket Car Shampoo — 1:50~1:500 (1:50-500)
Usage
- Active foam: ensure the surface is cool and avoid direct sunlight. Dilute 100 ml of product in 1 L of warm water.
- Apply the foam evenly using a pressure foam cannon (PA lance).
- Leave on the surface for 3–5 minutes.
- Rinse thoroughly with pressurized water.
- Proceed to the main wash stage.
- Bucket shampoo: first remove loose dirt using Double Sour Pre Wash Concentrate or Citrus Pre Cleaner.
- Dilute shampoo according to soiling level — for regular maintenance: 20–50 ml per 10 L of water; for heavier soiling: 50–100 ml per 5 L of water.
- Foam the shampoo solution using a foam lance or hose, then apply with a wash mitt or sponge using lengthwise strokes, starting from the upper body panels and finishing with wheel arches, sills, and wheels.
- Rinse thoroughly with pressurized water and dry with a clean microfiber towel.
핵심 특징
- 시장 최초 산성 샴푸 겸 액티브 폼 2-in-1 제품
- 산성 pH 5.5 — 코팅 표면의 신선한 미네랄 침착물을 안전하게 제거
- 세라믹 및 쿼츠 코팅의 발수 성능 복원
- 고농축 — 일반 세차 시 물 10 L에 20 ml만 사용
- 우수한 윤활성의 풍부하고 조밀하며 안정적인 거품 생성
- 코팅된 도장면에 안전 — 손상 위험 없음
- 신선한 세탁 향
사용법
- 액티브 폼: 표면이 차가운지 확인하고 직사광선을 피합니다. 제품 100 ml를 따뜻한 물 1 L에 희석합니다.
- 압력식 폼 캐논(PA 란스)으로 폼을 균일하게 도포합니다.
- 표면에 3–5분간 방치합니다.
- 고압수로 완전히 헹굽니다.
- 본세차 단계로 진행합니다.
- 버킷 샴푸: 먼저 Double Sour Pre Wash Concentrate 또는 Citrus Pre Cleaner로 차체의 느슨한 오염물을 제거합니다.
- 오염 정도에 따라 샴푸를 희석합니다 — 일반 세차: 물 10 L에 20–50 ml; 심한 오염: 물 5 L에 50–100 ml.
- 폼 란스나 호스로 샴푸 용액을 거품 내어 세차 미트나 스펀지로 세로 방향으로 도포합니다. 차체 윗부분부터 시작해 휠 아치, 사이드 실, 휠 순으로 마무리합니다.
- 고압수로 완전히 헹구고 깨끗한 마이크로파이버 타월로 건조합니다.