Shine Supply Shine Wash & Wax Soap Dilution Ratios & User Guide

Shine Supply Shine Wash & Wax Soap dilution ratio and pH specification chart

샤인 워시 앤 왁스 솝

Shine Supply Shine Wash & Wax Soap — Exterior : Bucket Car Shampoo, neutral pH, base dilution 1:8~1:16. At 1:8, mix about 125 ml of Shine Supply Shine Wash & Wax Soap per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/shine-supply/shine-wash-and-wax-soap

Shine Supply 샤인 워시 앤 왁스 솝 — Exterior : Bucket Car Shampoo, pH neutral, 기본 희석 1:8~1:16. 1:8 기준 물 1L당 Shine Supply 샤인 워시 앤 왁스 솝 약 125ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/shine-supply/shine-wash-and-wax-soap

Shine Wash & Wax Soap is a low-foaming, pH-balanced car wash shampoo for vehicles already protected with wax or sealant. Wax polymers reinforce that existing protection as you clean, while water-softening agents help reduce water spotting during the wash. It is not intended for ceramic-coated vehicles.

샤인 워시 앤 왁스 솝은 이미 왁스나 실란트로 보호된 차량을 위한 저거품 pH 중성 세차 샴푸입니다. 왁스 폴리머가 세척하면서 기존 보호층을 보강하고, 연수화 성분이 세차 중 물자국을 줄여 줍니다. 세라믹 코팅 차량에는 적합하지 않습니다.

Brand
Shine Supply
Categories
Exterior : Bucket Car Shampoo, Exterior : Foam
Primary dilution
1:8~1:16
pH
neutral (6)
Last updated
2026-05-29

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:8~1:161:8-16
Exterior : Bucket Car Shampoo1:841:84

Usage

  1. Rinse the vehicle thoroughly to remove loose dirt.
  2. Foam gun or cannon: add 2 to 4 oz of Shine Soap, fill with water, apply foam, then contact wash with proper media.
  3. Bucket wash: add 4 oz of Shine Soap to a bucket, fill with water, and wash top-down with clean media.
  4. Rinse thoroughly and dry to prevent water spotting.

핵심 특징

  • 왁스·실란트 차량용 저거품 pH 중성 배합
  • 왁스 폴리머가 세척하며 기존 보호층 보강
  • 연수화 성분으로 물자국 감소
  • 빠른 헹굼으로 시간과 물 절약
  • 세라믹 코팅 차량에는 부적합
  • 정기 유지 세차용

사용법

  1. 느슨한 오염물을 씻어내도록 차량을 충분히 헹굽니다.
  2. 폼건 또는 폼 캐논: 샤인 솝 2~4 oz를 넣고 물을 채워 폼을 도포한 뒤 세차 도구로 컨택트 세차합니다.
  3. 버킷 세차: 버킷에 샤인 솝 4 oz를 넣고 물을 채워 깨끗한 도구로 위에서 아래로 세차합니다.
  4. 물자국이 생기지 않도록 충분히 헹군 뒤 건조합니다.

Also known as: 샤인 서플라이, Shine Supply Shine Wash & Wax Soap, SS Shine Wash & Wax Soap, Shine Soap, 샤인 서플라이 샤인 솝, PR-SHNS16

한국어로 보기

Sources

Related products

More from Shine Supply

More Bucket Car Shampoo products

Explore more