servFaces Scheibenfrostschutz und Klarsicht -40°C Dilution Ratios & User Guide

servFaces Scheibenfrostschutz und Klarsicht -40°C dilution ratio and pH specification chart

샤이벤프로스트슈츠 운트 클라르지히트 -40°C

servFaces Scheibenfrostschutz und Klarsicht -40°C — Exterior : Glass Cleaner, base dilution 1:1~1:3. At 1:1, mix about 1000 ml of servFaces Scheibenfrostschutz und Klarsicht -40°C per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/servfaces/scheibenfrostschutz-und-klarsicht-40-c

servFaces 샤이벤프로스트슈츠 운트 클라르지히트 -40°C — Exterior : Glass Cleaner, 기본 희석 1:1~1:3. 1:1 기준 물 1L당 servFaces 샤이벤프로스트슈츠 운트 클라르지히트 -40°C 약 1000ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/servfaces/scheibenfrostschutz-und-klarsicht-40-c

A windshield washer fluid concentrate that clears winter road grime and keeps visibility down to -40°C. It helps stop the washer system and spray nozzles from freezing, and guards against stress cracks and fogging on headlight lenses, including LED, XENON, and plastic units.

영하 40도까지 방한 성능을 발휘하는 앞유리 워셔액 농축제로, 겨울철 도로 오염을 제거하고 선명한 시야를 확보해 줍니다. 워셔 시스템과 분사 노즐의 결빙을 막으며, LED·제논·플라스틱 렌즈를 포함한 헤드라이트의 균열과 불투명화도 막아줍니다.

Brand
servFaces
Categories
Exterior : Glass Cleaner
Primary dilution
1:1~1:3
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-05-29

Key features

Dilution

UseDilutionRatio
Exterior : Glass Cleaner (primary)1:1~1:31:1-3

Usage

  1. Empty the windshield washer reservoir before filling, then rinse with clean water if needed.
  2. Open the product and slowly pour the desired amount into the reservoir.
  3. Add water per the antifreeze ratio table (for example, undiluted for -40°C, 1:1 for -20°C).
  4. Run the washer system to flush the lines after filling.

핵심 특징

  • 영하 40도까지 동결 방지
  • 겨울철 도로 오염 제거
  • 워셔 시스템 및 노즐 결빙 방지에 도움
  • 헤드라이트 렌즈 균열 및 불투명화 방지
  • LED, 제논, 플라스틱 렌즈 호환

사용법

  1. 워셔액 탱크를 비운 뒤 필요 시 깨끗한 물로 헹굽니다.
  2. 제품을 열어 원하는 양을 탱크에 천천히 붓습니다.
  3. 희석 비율표에 따라 물을 추가합니다(예: -40°C는 원액 사용, -20°C는 1:1 희석).
  4. 충전 후 워셔 시스템을 작동시켜 라인을 세척합니다.

Also known as: serv, 서브페이스, 서브, servFaces Scheibenfrostschutz und Klarsicht -40°C, SF Scheibenfrostschutz und Klarsicht -40°C, 서브페이시스 샤이벤프로스트슈츠 운트 클라르지히트 -40°C, SF10486

한국어로 보기

Sources

Related products

More from servFaces

More Glass Cleaner products

Explore more