POLYTOP Diamant 7000 Fine Cut User Guide

POLYTOP Diamant 7000 Fine Cut dilution ratio and pH specification chart

디아만트 7000 파인 컷

POLYTOP Diamant 7000 Fine Cut — Exterior : Polishes, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/polytop/diamant-7000-fine-cut

POLYTOP 디아만트 7000 파인 컷 — Exterior : Polishes, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/polytop/diamant-7000-fine-cut

A fine-cut and finishing polish that removes light scratches up to 5000-grit along with polishing haze and gray haze. Its special abrasive blend delivers reliable defect correction under very light machine pressure, cutting immediately once polishing begins and leaving a hologram-reduced high-gloss finish with brilliant depth of shine.

5000방 사포자국까지의 가벼운 스크래치와 폴리싱 헤이즈, 그레이 헤이즈를 제거하는 파인컷 및 마무리용 폴리시이다. 특수한 연마 성분 조합이 가벼운 기계 압력만으로도 결함을 신뢰성 있게 교정하며, 폴리싱 시작과 동시에 바로 작용하여 미세 스크래치가 줄어든 깊은 광택의 고광택 마감을 남긴다.

Brand
POLYTOP
Categories
Exterior : Polishes
pH
neutral (8)
Last updated
2026-07-19

Key features

Usage

  1. Pre-work the surface with clay/prepa pad and lubricant to remove coarse and fine contamination; depending on paint condition, a first pass with a Diamant-series cutting compound is recommended for an optimal paint finish, using a wipe-down spray to check the result.
  2. Apply the polishing compound evenly to a medium cutting pad or anti-hologram pad, work it into the surface section by section in a crosshatch pattern, using medium speed and little to no pressure with a rotary or forced-rotation polisher, or medium-to-high speed with light pressure on a free-spinning orbital polisher.
  3. Blow out the polishing pad with air after each panel to maintain consistent performance, and let it rest between panels while working with a second pad.
  4. Remove polishing residue and degrease the paint surface with wipe-down spray using a microfiber towel to check the finish.

핵심 특징

  • 파인컷 및 마무리용 폴리시
  • 5000방 사포자국까지 가벼운 스크래치 제거
  • 폴리싱 헤이즈 및 그레이 헤이즈 제거
  • 가벼운 압력으로 작업 가능
  • 미세 스크래치가 줄어든 고광택 마감
  • 깊은 광택감

사용법

  1. 클레이나 프렙 패드와 윤활제로 표면을 미리 처리해 거친 오염과 미세 오염을 제거하고, 도장 상태에 따라 디아만트 시리즈 컴파운드로 1차 작업을 진행해 최적의 도장 상태를 만든 뒤 와이프다운 스프레이로 결과를 확인한다.
  2. 미디엄 커팅 패드나 안티 홀로그램 패드에 폴리시를 고르게 도포하고 구역별로 십자 방향으로 문질러 작업하며, 로터리나 강제 편심 폴리셔는 중간 속도에 약한 압력, 자유 회전식 편심 폴리셔는 중~고속에 약한 압력으로 사용한다.
  3. 패널 작업 후마다 폴리싱 스펀지를 에어로 불어내 일정한 성능을 유지하고, 그 사이에는 다른 패드로 작업을 이어간다.
  4. 와이프다운 스프레이로 폴리싱 잔여물을 제거하고 탈지하여 마이크로파이버 타월로 마감 상태를 확인한다.

Also known as: 폴리탑, poly top, POLYTOP Diamant 7000 Fine Cut, PT Diamant 7000 Fine Cut, 폴리탑 디아만트 7000 파인 컷, 17100001

한국어로 보기

Sources

Related products

More from POLYTOP

More Polishes products

Explore more