Cosmic Spritz 2.0
코스믹 스프리츠 2.0
Cosmic Spritz 2.0 is a true spray coating combining high-concentration silica and titanium dioxide (TiO₂) to form a continuous, ultra-thin protective bond in under 20 minutes. It delivers controlled water-beading, chemical resilience against wash and environmental stress, and a clear composed gloss with no chalking or trim staining on wipe-off. Applicable on wet or dry paint, it layers cleanly over existing coatings, sealants, and waxes.
코스믹 스프리츠 2.0은 고농축 실리카와 이산화티타늄(TiO₂)을 결합한 진정한 스프레이 코팅으로, 20분 이내에 연속적이고 초박형 보호막을 형성합니다. 발수성, 내화학성, 선명한 광택을 제공하며 분필 자국이나 트림 오염 없이 깔끔하게 닦입니다. 젖거나 건조한 도장면 모두에 적용 가능하며 기존 코팅·실란트·왁스 위에 중첩 도포해 보호력을 강화할 수 있습니다.
- Brand
- Polish Angel
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- True coating with silica and TiO₂ bonding structure
- Full application in under 20 minutes
- Controlled water-beading for reduced mineral deposits
- Chemical resilience against wash and environmental stress
- No chalking or trim staining on wipe-off
- Applicable on dry or lightly damp paint
- Layers over existing coatings, sealants, and waxes
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Wash and fully decontaminate the paint surface; for best bonding, prepare with Invincible Primer or Primer Spritz.
- Shake well before use; work on a cool surface out of direct sunlight.
- Lightly mist onto the panel or a soft microfiber cloth and spread thin immediately.
- Buff to a clear finish right away.
- Wait at least 30 minutes before applying a second layer; two layers are recommended for full coating performance.
- Avoid water and heat for the first 12 hours; clarity and slickness continue to develop over 24 hours.
핵심 특징
- 실리카·이산화티타늄 결합 구조의 진정한 코팅
- 20분 이내 전체 도포 완료
- 발수성 제어로 물자국 최소화
- 세차 및 외부 환경 스트레스에 대한 내화학성
- 닦아낼 때 분필 자국·트림 오염 없음
- 건조 또는 가볍게 젖은 도장면 모두 적용 가능
- 기존 코팅·실란트·왁스 위에 중첩 도포 가능
사용법
- 도장면을 세척하고 완전히 오염 제거합니다. 최상의 밀착력을 위해 인빈서블 프라이머 또는 프라이머 스프리츠로 전처리합니다.
- 사용 전 충분히 흔들고 직사광선을 피한 서늘한 표면에서 작업합니다.
- 패널 또는 부드러운 마이크로파이버 천에 가볍게 분사한 후 즉시 얇게 펴 바릅니다.
- 즉시 투명하게 마무리될 때까지 닦아냅니다.
- 2번째 레이어 도포 전 최소 30분 대기합니다. 최상의 코팅 효과를 위해 2회 도포를 권장합니다.
- 처음 12시간 동안 수분과 열에 노출되지 않도록 하며, 24시간에 걸쳐 선명도와 매끄러움이 계속 발전합니다.
Also known as: 폴리쉬엔젤, 폴리시엔젤, 엔젤, angel, Polish Angel Cosmic Spritz 2.0, PA Cosmic Spritz 2.0, 폴리시엔젤 코스믹 스프리츠 2.0
한국어로 보기
Sources