Kronos Graphene Ceramic Clear Coat Protection
크로노스 그래핀 세라믹 클리어 코트 프로텍션
phoenix · EOD · phoenix eod · 피닉스 · Phoenix E.O.D. Kronos Graphene Ceramic Clear Coat Protection · KG · Phoenix E.O.D. KG · 크로노스 그래핀 세라믹 코팅 · 피닉스 크로노스 그래핀 세라믹 코팅 · 피닉스 KG
A protective coating that pairs a high-solids polysilazane base with graphene infusion to chemically bond to painted surfaces and form a dense glass-ceramic shell. The concentrated nanocrystalline formula deepens gloss, raises surface hardness, and improves resistance to chemicals, UV degradation, and environmental contamination. Built for professional-grade durability, it can protect for up to about seven years on properly maintained vehicles.
고함량 폴리실라잔 기반에 그래핀을 더해 도장 표면에 화학적으로 결합하며 치밀한 글래스 세라믹 막을 만드는 보호 코팅입니다. 농축 나노크리스탈 포뮬러가 광택의 깊이를 더하고 표면 경도를 높이며, 화학물질과 자외선 분해, 환경 오염에 대한 저항을 강화합니다. 전문가급 내구성을 목표로 만들어져 잘 관리한 차량에서 약 7년까지 보호합니다.
- Brand
- Phoenix E.O.D
- Categories
- Exterior : Coating
Key features
- 10H+ hardness with graphene-enhanced cross-linking
- Polysilazane and graphene technology for strong durability
- High water repellency and self-cleaning behavior
- High resistance to alkaline cleaners, degreasers, and chemicals
- Stronger UV and oxidation resistance
- Marine-grade environmental protection
- Controlled flash window for professional installation
- Up to 7 years durability on maintained surfaces
Usage
- Wash, fully decontaminate, and polish the surface; use Peleus Panel Prep to remove all oils and residues first.
- Make sure the surface is cool, dry, and out of direct sunlight.
- Shake well, then apply 5-10 drops onto a Phoenix E.O.D. Microsuede Applicator Block.
- Work one panel at a time in a cross-hatch pattern.
- Let it flash, watching for hazing or a rainbow effect; warm/humid needs 30-45 seconds, cool/dry needs 60-90 seconds.
- Level with a clean microfiber towel, then follow immediately with a second; if it streaks, lightly reapply to reactivate.
- When layering, wait at least 1 hour between coats and apply no more than 3 layers.
- Avoid water for 24 hours, remove standing water for 48 hours, and allow full chemical cure at 7 days.
핵심 특징
- 그래핀 강화 가교 결합으로 10H+ 경도
- 폴리실라잔과 그래핀 기술로 강한 내구성
- 강한 발수와 자기 세정 특성
- 알칼리성 클리너, 탈지제, 화학물질에 높은 내성
- 강화된 자외선·산화 저항
- 해양급 환경 보호
- 전문 시공을 위한 제어된 플래시 구간
- 관리된 표면에서 최대 7년 내구성
사용법
- 세차, 완전한 오염물 제거, 폴리싱을 마친 뒤 펠레우스 패널 프렙으로 모든 유분과 잔여물을 먼저 닦아냅니다.
- 표면이 시원하고 건조하며 직사광선이 닿지 않는지 확인합니다.
- 잘 흔든 뒤 피닉스 E.O.D. 마이크로스웨이드 도포 블록에 5~10방울을 떨어뜨립니다.
- 한 번에 한 패널씩 크로스해치 패턴으로 작업합니다.
- 헤이즈나 무지개 효과를 살피며 플래시되도록 둡니다. 따뜻하고 습하면 30~45초, 시원하고 건조하면 60~90초입니다.
- 깨끗한 마이크로파이버 타월로 레벨링한 뒤 즉시 두 번째 타월로 마무리하고, 얼룩이 생기면 가볍게 재도포해 다시 활성화합니다.
- 레이어링 시 코트 사이에 최소 1시간을 두고 3레이어를 넘기지 않습니다.
- 24시간 동안 물을 피하고 48시간 동안 고인 물을 제거하며 7일에 완전한 화학적 경화가 이루어집니다.