XR03
엑스알03
나지올 · Nasiol XR03 · 나시올 엑스알03
A professional-grade nano ceramic coating that bonds to automotive paint to deliver lasting scratch resistance, high gloss, and strong hydrophobic properties for up to 18 months. It protects vehicle surfaces against acid rain, bird droppings, road salt, and UV damage while making cleaning faster and easier.
차량 도장면에 결합하여 최대 18개월 동안 스크래치 저항, 고광택, 강력한 발수 성능을 제공하는 프로페셔널 나노 세라믹 코팅입니다. 산성비, 조류 배설물, 도로 염분, 자외선으로부터 보호하며 세차를 더욱 쉽게 만들어줍니다.
- Brand
- Nasiol
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Up to 18 months durability on automotive paint
- High scratch and abrasion resistance
- Strong hydrophobic surface with easy-clean properties
- Super gloss enhancement
- High chemical resistance against acid rain and road contaminants
- No special equipment required — all-inclusive kit
- Recommended for professional detailers
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Wash the vehicle thoroughly, apply clay bar if needed, then polish with a silicone- and wax-free compound as required by the surface condition.
- Wash the car again and ensure all application areas are completely dry.
- Prepare the surface with a pre-cleaner to remove residual contamination, then dry with a lint-free microfiber cloth.
- Wear the protective nitrile gloves provided and place the suede cloth onto the applicator block.
- Shake the product gently, open the lid, and pour the necessary amount (5–8 mL per m²) onto the suede cloth. Work on areas no larger than 1 m² at a time.
- Spread the product over the surface using a criss-cross motion. Once beading appears (30–60 seconds), gently wipe off the excess with a microfiber cloth using linear strokes.
- Complete the final buff with circular motions using a clean microfiber cloth for each section.
- Keep the coated surface away from sunlight, dust, water, and contaminants for 24 hours during the curing period.
핵심 특징
- 차량 도장면에 최대 18개월 지속력
- 높은 스크래치 및 마모 저항성
- 강력한 발수 표면과 간편 세정 특성
- 슈퍼 글로스 효과 향상
- 산성비 및 도로 오염물 대응 높은 내화학성
- 별도 장비 불필요 — 올인클루시브 키트 구성
- 전문 디테일러 추천 제품
사용법
- 차량을 깨끗이 세차하고 필요시 클레이 바를 사용한 후, 표면 상태에 맞는 실리콘·왁스 프리 컴파운드로 폴리싱합니다.
- 다시 세차하고 도포 부위를 완전히 건조합니다.
- 전처리제로 잔여 오염을 제거한 후 보풀 없는 마이크로파이버 천으로 닦아냅니다.
- 동봉된 니트릴 장갑을 착용하고 어플리케이터 블록에 스웨이드 천을 장착합니다.
- 제품을 부드럽게 흔든 후 뚜껑을 열고 필요한 양(1m²당 5~8 mL)을 스웨이드 천에 도포합니다. 한 번에 1m² 이하의 면적에 작업합니다.
- 십자 교차 동작으로 제품을 펴 바릅니다. 물방울 맺힘이 나타나면(30~60초) 마이크로파이버 천으로 직선 동작을 사용해 잔여물을 부드럽게 닦아냅니다.
- 각 섹션마다 깨끗한 마이크로파이버 천으로 원형 동작으로 최종 버핑합니다.
- 경화 기간 동안 24시간 코팅면을 직사광선, 먼지, 물, 오염물로부터 보호합니다.