Nasiol MarineCoat One Dilution Ratios & User Guide

Nasiol MarineCoat One dilution ratio and pH specification chart

마린코트 원

Nasiol MarineCoat One — Exterior : Coating, acid pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/nasiol/marinecoat-one

Nasiol 마린코트 원 — Exterior : Coating, pH acid. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/nasiol/marinecoat-one

MarineCoat One is a nano ceramic coating engineered for marine gelcoat and plastic surfaces, delivering tough scratch protection along with UV and chemical resistance. The coating imparts a high-gloss, easy-to-clean finish and provides antifouling properties for both underwater and above-water sections of a vessel.

마린코트 원은 선박의 겔코트 및 플라스틱 표면을 위한 나노 세라믹 코팅으로, 강력한 스크래치 방어와 자외선·화학 물질 저항성을 제공합니다. 발수 특성과 방오 기능을 갖춰 선체의 수중 및 수상 부위 모두에 적합합니다.

Brand
Nasiol
Categories
Exterior : Coating
Primary dilution
RTU
pH
acid (5)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-08

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Ensure the surface is completely clean and dry, and that temperature is between 5°C and 30°C at ≤50% RH.
  2. Put on the protective nitrile gloves and shake the product gently before use.
  3. Place a suede cloth on the applicator block sponge, then pour the required amount of product onto the suede cloth.
  4. Spread the product over the surface using a crisscross motion.
  5. Once water beading appears, gently wipe off excess product with the light gray microfiber cloth in linear motions. Fold the cloth four times before use.
  6. Complete final buffing with the dark gray microfiber cloth in circular motions.
  7. Keep the coated surface away from sunlight, contaminants, and water for 24 hours; wait 48 hours before detergent-based washing.

핵심 특징

  • 탁월한 광택 향상
  • 높은 화학 물질 및 자외선 저항성
  • 방오 보호
  • 매우 쉬운 세척성
  • 원래 겔코트 색상 유지

사용법

  1. 표면이 완전히 깨끗하고 건조한 상태인지, 온도가 5°C~30°C이고 습도가 50% 이하인지 확인합니다.
  2. 니트릴 장갑을 착용하고 제품을 사용 전 가볍게 흔듭니다.
  3. 어플리케이터 블록의 스펀지에 스웨이드 천을 올린 후, 필요한 양의 제품을 스웨이드 천에 부어 줍니다.
  4. 크리스크로스 방식으로 표면에 제품을 펴 바릅니다.
  5. 물방울 맺힘이 나타나면 밝은 회색 마이크로파이버 천을 네 번 접어 직선 방향으로 잔여물을 부드럽게 닦아냅니다.
  6. 진한 회색 마이크로파이버 천으로 원형 동작을 사용해 최종 버핑을 완료합니다.
  7. 코팅 후 24시간 동안 직사광선, 오염물질 및 물을 피하고, 세제를 이용한 세척은 48시간 후에 진행합니다.

Also known as: 나지올, Nasiol MarineCoat One, MCO, Nasiol MCO, 나시올 마린코트 원

한국어로 보기

Sources

Related products

More from Nasiol

More Coating products

Explore more