NANOSKIN CARPET SHAMPOO Dilution Ratios & User Guide

NANOSKIN CARPET SHAMPOO dilution ratio and pH specification chart

카펫 샴푸

NANOSKIN CARPET SHAMPOO — Interior : Fabric Cleaner, neutral pH, base dilution 1:19. At 1:19, mix about 52.6 ml of NANOSKIN CARPET SHAMPOO per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/nanoskin/carpet-shampoo

NANOSKIN 카펫 샴푸 — Interior : Fabric Cleaner, pH neutral, 기본 희석 1:19. 1:19 기준 물 1L당 NANOSKIN 카펫 샴푸 약 52.6ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/nanoskin/carpet-shampoo

NANOSKIN CARPET SHAMPOO is a concentrated carpet cleaner that dilutes up to 19:1 for residential and commercial cleaning. The foaming action helps lift dirt, stains, and soils from fibers, and the formula is built to dry without sticky residue and to slow resoiling.

나노스킨 카펫 샴푸는 최대 19:1까지 희석해 쓰는 농축 카펫 클리너로, 가정과 상업 환경에서 모두 사용할 수 있습니다. 거품이 섬유 속의 오염, 얼룩, 이물질을 떠올리는 데 도움을 주고, 끈적임이 남지 않으며 재오염 속도를 늦추도록 만들어졌습니다.

Brand
NANOSKIN
Categories
Interior : Fabric Cleaner
Primary dilution
1:19
pH
neutral (7)
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Interior : Fabric Cleaner (primary)1:191:19

Usage

  1. Vacuum the carpet to remove loose dirt, then test colorfastness on a hidden area.
  2. Dilute with water up to 19:1 (about 2 oz per gallon); use a stronger mix for heavy soiling.
  3. Shake the container and apply an even layer of foam over a small carpet section with a foaming pump sprayer or electric foamer.
  4. Work the foam into the fibers with a mop, soft brush, or sponge to loosen embedded dirt and stains.
  5. Let the foam dwell for about 5 minutes.
  6. Extract the foam and lifted soils with a wet/dry vacuum or carpet extractor; repeat on heavily soiled areas.
  7. Let the carpet air dry fully before walking on it; fans or open windows speed drying.

핵심 특징

  • 최대 19:1 희석 농축액
  • 섬유 속 거품 세정
  • 습식·건식 오염 분리 기술
  • 세정 사이 재오염 속도 저하
  • 끈적임 없는 건조 마감
  • 오염 방지 처리 카펫과 울에 안전

사용법

  1. 카펫을 꼼꼼히 진공 청소해 이물질을 먼저 제거하고, 눈에 띄지 않는 부위에서 변색 여부를 확인합니다.
  2. 오염 정도에 따라 물과 최대 19:1(약 1갤런당 2온스)로 희석합니다. 오염이 심하면 농도를 더 높입니다.
  3. 용기를 흔든 뒤 폼 스프레이어나 전동 포머로 작은 구역에 거품을 고르게 도포합니다.
  4. 대걸레, 부드러운 솔 또는 스펀지로 거품을 섬유에 문질러 오염과 얼룩을 분리합니다.
  5. 거품을 약 5분간 그대로 둡니다.
  6. 습·건식 진공 청소기나 카펫 추출기로 거품과 분리된 오염을 빨아냅니다. 오염이 심한 부위는 반복합니다.
  7. 보행을 재개하기 전에 카펫을 완전히 자연 건조시키며, 선풍기나 창문 개방으로 건조를 앞당길 수 있습니다.

Also known as: 나노스킨, NANOSKIN CARPET SHAMPOO, NS CARPET SHAMPOO, CS, NANOSKIN CS, NS CS, 나노스킨 카펫 샴푸

한국어로 보기

Sources

Related products

More from NANOSKIN

More Fabric Cleaner products

Explore more