Liquid Laboratories Surge Dilution Ratios & User Guide

Liquid Laboratories Surge dilution ratio and pH specification chart

서지

Liquid Laboratories Surge — Exterior : Tire&Wheel Cleaner, acid pH, base dilution 1:5~1:10. At 1:5, mix about 200 ml of Liquid Laboratories Surge per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/liquid-laboratories/surge

Liquid Laboratories 서지 — Exterior : Tire&Wheel Cleaner, pH acid, 기본 희석 1:5~1:10. 1:5 기준 물 1L당 Liquid Laboratories 서지 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/liquid-laboratories/surge

Surge is an acid-based wheel cleaner developed to dissolve stubborn brake dust, mineral deposits, and embedded road grime from clear-coated and lacquered wheel surfaces. Its fast-reacting formula rapidly breaks down contamination on contact and restores clarity to neglected finishes. Surge offers excellent rinseability on compatible wheel surfaces when used at the correct dilution, and should not be used on polished, bare metal, or anodised finishes.

서지는 클리어 코팅 및 래커 처리된 휠 표면의 완고한 브레이크 더스트, 미네랄 침전물, 고착 오염물을 용해하는 산성 휠 클리너입니다. 빠르게 반응하는 포뮬러가 접촉 즉시 오염을 분해하여 오랫동안 방치된 표면의 선명도를 되살립니다. 적절히 희석하면 호환 가능한 휠 마감에서 헹굼성을 보이며, 광택 처리·맨 금속·아노다이징 마감에는 사용하지 않아야 합니다.

Brand
Liquid Laboratories
Categories
Exterior : Tire&Wheel Cleaner
Primary dilution
1:5~1:10
pH
acid
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Tire&Wheel Cleaner (primary)1:5~1:101:5-10

Usage

  1. Dilute Surge according to soiling level: 1:10 for light soiling, 1:5 for general cleaning, or use neat for heavy contamination.
  2. Apply to the wheel surface and allow to dwell briefly so the formula can react with contamination.
  3. Agitate with a wheel brush if needed, then rinse thoroughly with clean water.
  4. Always test on an inconspicuous area first. Do not use on polished, bare metal, or anodised finishes.

핵심 특징

  • 심층 휠 오염 제거를 위한 산성 포뮬러
  • 브레이크 더스트, 미네랄 침전물, 도로 오염물 용해
  • 클리어 코팅 및 래커 마감에 적합
  • 접촉 즉시 빠른 반응
  • 처리 후 헹굼성
  • 광택 처리, 맨 금속, 아노다이징 마감에는 사용 금지

사용법

  1. 오염 정도에 따라 서지를 희석합니다: 가벼운 오염은 1:10, 일반 세정은 1:5, 심한 오염은 원액 사용.
  2. 휠 표면에 도포하고 잠시 반응 시간을 두어 오염물이 분해되도록 합니다.
  3. 필요 시 휠 브러시로 세정한 후 깨끗한 물로 충분히 헹궈냅니다.
  4. 눈에 띄지 않는 부위에 먼저 테스트하세요. 광택 처리, 맨 금속, 아노다이징 마감에는 사용하지 마세요.

Also known as: 리퀴드, Liquid, 리퀴드랩, Liquid Laboratories Surge, Liquid Surge, LL Surge, 리퀴드 랩스 서지, 리퀴드 서지

한국어로 보기

Sources

Related products

More from Liquid Laboratories

More Tire&Wheel Cleaner products

Explore more