Liquid Laboratories Ignite Dilution Ratios & User Guide

Liquid Laboratories Ignite dilution ratio and pH specification chart

이그나이트

Liquid Laboratories Ignite — Exterior : Pre-washing (Pretreatment), base dilution 1:10~1:100. At 1:10, mix about 100 ml of Liquid Laboratories Ignite per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/liquid-laboratories/ignite

Liquid Laboratories 이그나이트 — Exterior : Pre-washing (Pretreatment), 기본 희석 1:10~1:100. 1:10 기준 물 1L당 Liquid Laboratories 이그나이트 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/liquid-laboratories/ignite

Ignite is a highly concentrated, low-foaming citrus pre-wash designed to break down traffic film, grease, and organic contamination ahead of contact washing. Its blend of natural citrus solvents and biodegradable surfactants emulsifies dirt on contact, helping to reduce the risk of wash-induced marring. Suitable for all exterior surfaces including paint, glass, trim, and wheels, and safe on waxes, sealants, and ceramic coatings

이그나이트는 컨택트 세차 전 도로 오염물, 유분, 유기 오염을 분해하는 고농축 저발포 시트러스 프리워시입니다. 천연 시트러스 용제와 생분해성 계면활성제가 오염물을 즉시 유화시켜 세차로 인한 표면 손상 위험을 줄여줍니다. 도장, 유리, 몰딩, 휠 등 모든 외장 표면에 적합하며, 왁스, 실런트, 세라믹 코팅 위에서도 안전하게 사용할 수 있습니다

Brand
Liquid Laboratories
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:10~1:100
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:10~1:1001:10-100

Usage

  1. Dilute Ignite to suit the task: 1:100 for maintenance, 1:50 for general cleaning, or 1:10 for heavy degreasing
  2. Apply the diluted solution to the vehicle surface using a pump sprayer or trigger bottle
  3. Allow to dwell on the surface, then rinse thoroughly before proceeding with contact washing

핵심 특징

  • 고농축 시트러스 포뮬러
  • 펌프 스프레이어 또는 트리거 보틀용 저발포 설계
  • 천연 시트러스 용제 및 생분해성 계면활성제
  • 도로 오염물, 유분, 유기 오염 분해
  • 세차로 인한 표면 손상 위험 감소
  • 왁스, 실런트, 세라믹 코팅 위에 안전 사용
  • 모든 외장 표면과 호환

사용법

  1. 용도에 맞게 희석합니다: 유지 관리는 1:100, 일반 세정은 1:50, 강력 탈지는 1:10
  2. 펌프 스프레이어 또는 트리거 보틀로 희석된 제품을 차량 표면에 도포합니다
  3. 표면에서 충분히 반응시킨 후 물로 완전히 헹군 다음 컨택트 세차를 진행합니다

Also known as: 리퀴드, Liquid, 리퀴드랩, Liquid Laboratories Ignite, Liquid Ignite, LL Ignite, 리퀴드 랩스 이그나이트, 리퀴드 이그나이트

한국어로 보기

Sources

Related products

More from Liquid Laboratories

More Pre-washing (Pretreatment) products

Explore more