FUSION1
퓨전1
FUSION1 is a hybrid solid-state ceramic coating that fuses silica aerogel with organic polysilazane resin in a paste format, delivering professional-grade protection with the simplicity of a wax. It cures to 9H hardness and provides up to 12.5 months of real-world durability on decontaminated and polished surfaces. No garage or climate-controlled environment is required, and the surface is safe to drive within one hour of application.
FUSION1은 실리카 에어로겔과 유기 폴리실라잔 수지를 결합한 고체 상태 세라믹 코팅 페이스트로, 왁스 수준의 간편함으로 전문가급 보호 성능을 제공합니다. 경화 후 9H 경도에 도달하며, 오염 제거 및 폴리싱된 표면에서 최대 12.5개월의 실제 내구성이 확인됩니다. 실내 또는 온도 제어 환경 없이도 시공이 가능하며, 도포 1시간 후 주행이 가능합니다.
- Brand
- Liquid Laboratories
- Categories
- Exterior : Coating
Key features
- Silica aerogel and polysilazane resin hybrid formula
- 9H hardness cured scratch resistance
- Up to 12.5 months real-world durability
- Outdoor application without controlled conditions
- Safe to drive within 1 hour of application
- Paste format with wax-like ease of use
Usage
- Ensure the vehicle is clean and dry; for optimal 9H bonding, decontaminate and polish the surface beforehand.
- Apply a small amount of paste to a foam applicator and spread in even straight lines, working one to three panels at a time.
- Allow the coating to cure for approximately 10 minutes; avoid warm panels or direct sunlight during this phase.
- Buff off the haze with a clean, plush microfibre cloth to reveal a deep glass-like finish.
핵심 특징
- 실리카 에어로겔과 폴리실라잔 수지 하이브리드 포뮬러
- 경화 후 9H 경도 스크래치 저항성
- 실제 환경 기준 최대 12.5개월 내구성
- 실외 환경에서도 시공 가능
- 도포 1시간 후 주행 가능
- 왁스처럼 편리한 페이스트 타입
사용법
- 차량이 깨끗하고 건조한 상태인지 확인하고, 최적의 9H 접착력을 위해 사전에 오염 제거 및 폴리싱을 진행하세요.
- 폼 어플리케이터에 소량의 페이스트를 덜어 한 번에 1~3개 패널을 직선으로 고르게 도포하세요.
- 약 10분간 경화시키되, 뜨거운 패널이나 직사광선을 피하세요.
- 깨끗하고 부드러운 극세사 천으로 잔여물을 닦아내 깊이 있는 유리 광택 마감을 완성하세요.