WET SEAL CERAMIC
웻 씰 세라믹
WET SEAL CERAMIC is a spray-on wet sealant applied directly to wet paint during the car wash rinse stage, delivering ceramic-level paint protection and deep gloss in a single step without additional effort. It creates a protective layer that promotes strong water beading, eases drying, and shields the paint from UV rays, weather, and minor surface contaminants.
웻 씰 세라믹은 세차 헹굼 단계에서 젖은 도장면에 직접 분사하는 웻 실란트로, 별도의 추가 작업 없이 한 번에 세라믹 수준의 도장 보호와 깊은 광택을 구현합니다. 강한 발수 효과를 유도하는 보호막을 형성하고 건조를 쉽게 만들며 자외선, 날씨, 미세 오염물질로부터 도장을 보호합니다.
- Brand
- Liquid Elements
- Categories
- Exterior : Drying Aid, Exterior : Coating
- Primary dilution
- RTU
Key features
- Applied directly to wet paint during washing
- Single-step ceramic paint sealant
- Deep gloss enhancement
- Strong water beading and repellency
- UV and weather protection
- Spray on, rinse off — no buffing required
- Eases drying
Dilution
- Exterior : Drying Aid — RTU (1:0) (primary)
Usage
- Wash the vehicle thoroughly by hand first.
- Shake the bottle well before use.
- Spray WET SEAL CERAMIC evenly onto the wet, cool paint surface.
- Allow to dwell for 20 seconds up to a maximum of 1 minute depending on ambient temperature — do not let it dry on the surface.
- Rinse off all residue with a pressure washer.
- At temperatures below 10°C, wipe with a microfiber cloth after rinsing. Up to 3 layers can be applied at 24-hour intervals.
핵심 특징
- 세차 중 젖은 도장면에 바로 도포
- 1단계 세라믹 도장 실란트
- 깊은 광택 향상
- 강력한 발수 및 방수 효과
- 자외선·날씨 보호
- 분사 후 헹굼만으로 완료 — 버핑 불필요
- 건조 용이성 향상
사용법
- 먼저 차량을 손으로 완전히 세차합니다.
- 사용 전 병을 충분히 흔듭니다.
- 웻 씰 세라믹을 젖어 있는 차가운 도장면에 고르게 분사합니다.
- 주변 온도에 따라 20초에서 최대 1분 동안 놔둡니다 — 절대 건조되게 두지 마십시오.
- 고압 세척기로 잔여물을 완전히 헹굽니다.
- 10°C 이하에서는 헹굼 후 마이크로파이버 타월로 닦아내야 합니다. 24시간 간격으로 최대 3겹까지 도포 가능합니다.
Also known as: 리퀴드 엘리먼츠, liquid, 리퀴드, 리퀴드 엘리먼트, Liquid Elements WET SEAL CERAMIC, LE WET SEAL CERAMIC, WSC, 리퀴드 엘리먼츠 웻 씰 세라믹