Hull Precleaner acid
헐 프리클리너 애시드
Concentrated acidic pre-wash for boat hulls and decks, blending mild acids with surfactants for thorough yet gentle cleaning. Works on gelcoat, paint and plastic, and also lifts limescale and rust marks from stainless steel.
보트 선체와 갑판을 사전 세척할 때 쓰는 고농축 산성 클리너로, 약산과 계면활성제 조합으로 부드러우면서도 깊이 있는 세정력을 발휘합니다. 젤코트, 도장면, 플라스틱뿐 아니라 스테인리스 스틸의 석회 자국과 녹 얼룩 제거에도 활용할 수 있습니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:10
- pH
- acid (1)
Key features
- Acidic pre-wash concentrate
- Lifts limescale and rust
- Safe for gelcoat and paint
- Cleans stainless steel
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:10 (1:10) (primary)
Usage
- Mix the cleaner 1:10 with water for normal soiling, or use it neat where the surface is heavily contaminated.
- Spread it on with the Pressure Sprayer acid or a wash sponge and let it dwell for no more than five minutes.
- Agitate stubborn areas with the Interior Scrubber if needed, then rinse the surface fully with water and a sponge.
- After cleaning, polish and seal the area; keep this product away from galvanised steel and bare aluminium.
핵심 특징
- 산성 사전 세정 농축액
- 석회·녹 자국 제거
- 젤코트·도장면 사용 가능
- 스테인리스 스틸 세척
사용법
- 일반 오염에는 물에 1:10으로 희석해 사용하고, 오염이 심한 부위에는 원액 그대로 도포합니다.
- 프레셔 스프레이어 애시드나 세척용 스폰지로 표면에 펴 바른 다음 최대 5분 동안 반응시킵니다.
- 필요할 때는 인테리어 스크러버로 추가 작업하고, 물과 스폰지로 표면을 충분히 헹궈냅니다.
- 세정 후에는 광택과 실링 작업을 이어 가며, 아연 도금 강철이나 알루미늄에는 사용하지 않습니다.