RH-
알에이치 마이너스
RH- is a paintwork deironizer developed to remove metallic fallout, iron particles, and brake dust from car paint. Sprayed directly onto the paintwork, it reacts chemically with embedded iron contaminants, producing a visible red bleeding effect that confirms active dissolution. Its adjusted viscosity keeps the product on vertical paint surfaces, maximizing contact time for thorough decontamination.
RH-는 차량 도장면에 쌓인 철 분진, 금속 오염물, 브레이크 분진을 제거하기 위해 개발된 도장용 탈철제입니다. 표면에 직접 분사하면 금속 오염물과 화학적으로 반응하며 붉은색 블리딩 효과가 나타나 반응 진행을 눈으로 확인할 수 있습니다. 적절히 조정된 점도 덕분에 수직 도장면에서도 흘러내리지 않고 밀착되어 충분한 반응 시간을 확보합니다.
- Brand
- KiurLab
- Categories
- Exterior : Remover
- Primary dilution
- RTU
Key features
- Chemically dissolves iron fallout and metallic particles from paintwork
- Visible red bleeding effect confirms active contamination removal
- Adjusted viscosity clings to vertical paint surfaces
- Safe for metallic, pearl, and coated paints
- Fast reaction — bleeding effect visible within seconds
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Ensure the paint surface is cold and shake the bottle before use.
- Protect exposed metal parts (brake discs, tow bar, etc.) with masking tape if necessary.
- Spray RH- onto the paintwork from approximately 10 cm away.
- For hard-to-reach areas, use a brush to distribute the product evenly.
- Wait about 5 minutes until the bleeding effect appears, then rinse thoroughly with cold water. Repeat if needed.
핵심 특징
- 도장면의 철 분진 및 금속 입자를 화학적으로 용해
- 붉은색 블리딩 반응으로 오염 제거 진행 확인 가능
- 수직 도장면에 밀착되는 최적 점도
- 메탈릭·펄·코팅 도장 모두에 안전
- 빠른 반응 — 분사 후 수 초 내 블리딩 효과 발생
사용법
- 도장면이 차가운 상태인지 확인하고 사용 전 병을 흔드세요.
- 브레이크 디스크, 견인 고리 등 노출된 금속 부품은 마스킹 테이프로 보호하세요.
- 약 10cm 거리에서 RH-를 도장면에 분사하세요.
- 접근이 어려운 부위는 브러시를 이용해 고르게 도포하세요.
- 약 5분간 블리딩 반응이 나타날 때까지 기다린 후, 차가운 물로 충분히 헹궈내세요. 필요 시 반복하세요.
Also known as: kiru, 키우랩, KiurLab RH-, 키우랩 알에이치 마이너스